Best Welded Wire Panels

Durham SSC-185-3S-5295 Bin Cabinet, 84\ Overall Height, 60\ Overall Width, Total Number of Bins 185

  • Full height welded piano hinges for increased strength and rigidity of doors.
  • 3-Point locking system with chrome keyed handle and 5/16 inch.
  • Double doors open water 180 degrees for full access.
  • Fully welded louvered panels reinforce door and hold hook-on bins. Allows weight capacity of 650 lbs per door (evenly distributed).
Check Stock

Lisle 51900 Spot Weld Chisel

  • Use to separate panels after the spot weld has been drilled out..
  • Drive the blade with a hammer from the end or the side through the panel seam..
  • The blade is sharpened on three sides, and offset for clearance..
Check Stock

Durham Heavy Duty Welded 14 Gauge Steel Cabinet with 176 Bins, DC48-176-95, 24' Length x 48' Width x 78' Height

  • Heavy duty all welded 14 gauge steel construction.
  • Fully welded louvered panels reinforce door and allow a load capacity of 650 pounds per door (evenly distributed).
  • 176 durable polyethylene copolymer Hook-On-Bins (5 different sizes).
  • Full height welded piano hinges for increased strength and rigidity of doors.
Check Stock

11FT Drywall Panel Hoist Professional Jack Lifter Heavy Duty Sheetrock Hoist Holder Rolling Wheels Lifter Construction Tool Capacity 150 LB Red

  • Lifts 11ft ceiling & 11ft wall. Apply various drywall panels up to 4ft*11ft..
  • This drywall panel lift lets you lift drywall and sheet rock without assistance.Sturdy welded steel construction with powder coating..
  • Hoist tilting for ceilings and walls. Can lower to 4.6ft off the floor for easy panel loading. 0.33ft caster wheels for easy rolling, built-in winch....
  • The sturdy welded steel construction holds single drywall panels up to 150 lb. and lifts up to 11 ft..
Check Stock

Fencer Wire 16 Gauge Black Vinyl Coated Welded Wire Mesh Size 0.5 inch by 0.5 inch 4 ft x 100 ft

  • Made of 16 gauge heavy duty galvanized wire, providing a double coating for maximum rust resistance and long life, vinyl coated....
  • With 0.5-inch mesh, the welded wire is flexible and tight enough to leave out large ground crawling arachnids.
  • Flexible design makes welded wire roll easy to use for a number of applications, you can tailor it to your specific....
  • You can use this wire for rustic country decor or to get hip artisanal look, also can work with T posts and wooden box to....
  • # Designed for fast and easy installation.
  • Fence Size: 4 ft. x 100 ft. with Mesh Size 0.5 inch x 0.5 inch, Home and garden uses include property....
Check Stock

Nasco The Original Rackaway 30-Shelf Drying Rack - Arts & Crafts Materials - 9707713

  • ...ng around. caster wheels brakes to keep it still. Art drying rack for classroom hollow mesh ladders are very suitable for placing wet paint panels.
  • work in progress, panels that have just been plastered and panels that have recently been polished..
  • ★ SERVICE LIFE ：This art drying rack for classrooms has a strong welded metal structure to extend its service life. Steel construction withstands heavy use and has a total weight capacity of 75 lbs. drying rack art each measures 12.2"W x 16.5"D ( 31cm W x 42cm D). The shelf spacing is 2.5/4.5cm to ensure that the artwork remains stain-free..
  • ★ Use Space Wisely : Versatile and moblie, the drying rack for art classroom gives you the choice to have 20 shelves with 2.5cm gap between them, or less shelves with a wider gap. Drying rack art classroom Perfect for childcare centers and art classes, art classroom or studio, Helps maximize table and shelf space.
  • ★WIDE RANGE OF APPLICATIONS: Organize and dry artwork safely. Classroom drying rack for art suitable for paper, cardboard, plastic, helps drying and storing oil painting, watercolour painting, posters and other flat sheets. suitable for studios, schools, families, kindergartens, early education centers, creative studios and other occasions that require d....
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

Sandusky Lee Muscle Rack ERZ772472WL3 Black Heavy Duty Steel Welded Storage Rack, 3 Shelves, 1,000 lb. Capacity per Shelf, 72\ Height x 77\ Width x 24\ Depth, Pack of 1

  • Standing three-shelf storage rack with welded steel end frames, welded steel beams, and wire shelves to support a 1,200-lb. capacity per shelf.
  • Measures 72" height by 77" width by 24" depth.
Check Stock

Sanhang 2-Pack 2x6ft Garage Storage Rack, Suitable for Garage, Storage Room Wall-Mounted Storage Shelf, Black

  • SUPER DESIGN: Garage Storage Rack with a 1" height steel structure on all sides, U-shaped folded edges wrapped and welded, steel wire mesh panels fall safely into the crossbeam support integrated welding, so that the load bearing is evenly distributed and exponentially enhanced, beautiful and safe enough to withstand loads of up to 440 pounds..
  • APPLICATION: Wall Mounted Steel Shelf allow you to orderly organize and categorize your messy and scattered items, making your garage/storage room neater and greater effective use in the expanded space. Very suitable for garage, storage room, supermarket and other indoor space wall..
  • SIZE, QUANTITY: 2 Pack (Length 2ft/35.43" * Width 3ft/23.6") Split splicing as a group, 2 groups (4 Pack).
  • EASY INSTALLATION: suitable for wood and brick walls (pre-drilled holes are required for installation), wall shelf garage storage rack components are independent of each other, easy to split and install, and can be installed arbitrarily parallel or vertically up and down according to the wall space..
  • SET INCLUDES: including 4 pack of mesh panels.
  • 24 hexagonal screws (hardened finish ∅0.3 length/2").
Check Stock

100 Pcs Fence Wire Clamps Agricultural Fencing Mounting Clips, Stainless Steel Wire Clips Cord Clamp for Mount 12-16 Gauge Welded Wire to Wood, Metal or Vinyl Fence

  • Better Protect Your Farm, Ranch & Home: Our wire fence clips great for attaching wire fencing to vinyl, wood, metal or other fence posts.
  • Get a tight hog wire fence to protect your farm and home.
  • Tight Fitting & Flexible: Perfect used for 12 to 16 Gauge welded wire, Fit for most types of fence wire were mounted on fence posts, There are 2 holes for you to install them at posts with screw.
  • Durable Fence Mounting Clamps: Our fence cable hold clamps are small but strong, designed to be a lightweight and long-lasting. Made of stainless steel, rust-resistance, No need worry them rusting and breaking, Protect your garden with our durable outdoor fence wire mounting clip.
  • Widely Usages: Use the cord clamps to install on post to protect your livestock, dogs, cats, cattle, pigs, pets or other animals.
  • Also widely used in warehouse, office or home to clamping cable securely in place, Professional choice for welded wire fence.
  • Simple to Use: Use the proper size cable and insert it into the round loop hole, then insert screw and secure to a proper place setting. Agricultural fencing wire rope clips were distributed every 2 to 3 feet horizontally and vertically, it is a perfect tools for ranch and farm needs.
Check Stock