Best Welding Butterfly Valve

1/4 NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON Standard USA Pipe Thread Solid Brass Direct Acting Viton Gasket Solenoid Valve by U.S Solid.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

SINGARO 45mm Spiked Aluminum Stem Valve Caps,4PCS Dustproof Tire Wheel Stem Caps for Cars,SUVs,Trucks Bicycles and Motorcycles(Gold)

  • High quality: Made of high-quality aluminum alloy, 100% brand-new and high-quality, fine workmanship, oxidation resistance, wear resistance and longer service life..
  • Full personality: The appearance of the valve cover is fashionable and full of personality. It can decorate the tires of the car and improve the appearance of the car. Suitable for cars, trucks, suvs, bicycles and motorcycles..
  • Easy installation: Without welding or drilling, just screw the valve cover to the valve stem along the thread for nondestructive installation..
  • Product size: The full length of pointed valve cap is 1.78 inches (45mm) and the diameter is 0.39 inches (10mm). Please note: Due to the long length of the valve cover, it is not suitable to enter the automatic car washing equipment. When entering the automatic car washing equipment, it is best to remove these valve covers first..
  • After service: If you have any questions about the product, please contact us in time, and we will provide you with satisfactory solutions..
Check Stock

SINGARO 45mm Spiked Aluminum Stem Valve Caps,4PCS Dustproof Tire Wheel Stem Caps for Cars,SUVs,Trucks Bicycles and Motorcycles(Red)

  • High quality: Made of high-quality aluminum alloy, 100% brand-new and high-quality, fine workmanship, oxidation resistance, wear resistance and longer service life..
  • Full personality: The appearance of the valve cover is fashionable and full of personality. It can decorate the tires of the car and improve the appearance of the car. Suitable for cars, trucks, suvs, bicycles and motorcycles..
  • Easy installation: Without welding or drilling, just screw the valve cover to the valve stem along the thread for nondestructive installation..
  • Product size: The full length of pointed valve cap is 1.78 inches (45mm) and the diameter is 0.39 inches (10mm). Please note: Due to the long length of the valve cover, it is not suitable to enter the automatic car washing equipment. When entering the automatic car washing equipment, it is best to remove these valve covers first..
  • After service: If you have any questions about the product, please contact us in time, and we will provide you with satisfactory solutions..
Check Stock

TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip (To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Idol Pleasures

  • ... notice: After use the propane weed torch, close the gas tank valve, Hang in a dry place for storage..
  • 【COMPLETE WEED BURNER PROPANE TORCH KIT】includes 1 * Propane Torch flame thrower, 1 * 6.5 Ft 300 PSI explosion-proof Hose(POL safety valve), 3 * stainless steelhead, 3 * clip.
  • BTU Rating: 500,000 btu. Highest Welding temperature: 3000℉.
  • 【QUALITY ASSURANCE】100% brand new propane torch flamethrower, 1 Year Warranty, Buy with confidence! If problem in the year quality warranty time, pls not hesitate to contact us for a free and easy replacement or refund..
Check Stock

Honeywell V5011N2089 1 2\ 2-Way F-NPT Globe Valve

  • Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Carbon steel valve body for tensile strength and hardness.
  • Bolted bonnet for tight assembly and reduced risk of leakage.
  • Socket-weld ends for welding to unthreaded pipes.
  • Maximum working pressure of 200 pounds per square inch (psi).
Check Stock

Beech Lane Patented Upgraded Toilet Water Valve Kit for Thetford Aqua Magic IV Toilets, Compare to Thetford Part 13168, High Performance in Freezing Conditions, Improved Valve Lifespan

  • .... Includes all hardware needed for replacment valve install and instructions..
  • PATENT PENDING- RE-ENGINEERED WITH PROPRIETARY POLYMER BLEND CONSTRUCTION FOR HIGH PERFORMANCE IN FREEZING CONDITIONS - Beech Lane has upgraded the stock valve hat has a tendency to fail often. A freeze resistant polymer blend, ultrasonic welding on vulnerable seams, and durable construction all work to prolong the lifespan and performance of this valve..
  • IMPROVED VALVE LIFESPAN - Beech Lane has improved the valve lifespan so you can go longer without having to go through the hassle of taking apart your Thetford toilet every year after the winter season..
  • MANUFACTURER LIFETIME WARRANTY - If the valve EVER fails, cracks, or leaks you will be covered under the manufacturer warranty for a free replacement..
  • This is an aftermarket replacement product (produced by Beech Lane) meeting or exceeding the quality of OEM valves (based on in-house testing). We have no affiliation with or endorsement from any of the manufacturers mentioned.
Check Stock

The Lost Explorer: Finding Mallory on Mount Everest

  • This third function kit allows you to add an electronically controlled hydraulic function to your tractor or skid loader without the need for expensive factory add-ons..
  • 1/2" Agricultural Couplers, Poppet, Male & Female, 1/2" NPT w/ Caps.
  • This 3rd function valve kit is powered by the power beyond port of your existing loader valve which will allow you to use multiple functions at the same time (i.e. curl bucket and close grapple)..
  • Kit includes joystick handle that replaces your existing handle and has 2 integrated momentary push button switches so you can open and close your cylinder with a push of a button..
  • The valve can be installed on any equipment that has a power beyond port on it pending the flow is less than 15 GPM. Includes a durable mounting bracket that can be mounted to your machine with bolts or welding..
Check Stock

WP-17FV TIG Welding Torch 150Amps Flexible Head Neck With Gas Valve Control 4M Hose Cable

  • This WP-17FV Flexible TIG Welder Torch Allows to bend the torch head at any direction you need while welding..
  • It is with 5/8-18RH Gas Power Hose Connnector,10-25plug and 2 Pins female air socket.
  • Cable Hose with Cloth Cover, better heat dispersion performance.You will get 1 complete tig welding torch at this price..
  • It with gas valve control, better for control gas..
Check Stock

SINGARO 45mm Spiked Aluminum Stem Valve Caps,4PCS Dustproof Tire Wheel Stem Caps for Cars,SUVs,Trucks Bicycles and Motorcycles Silver

  • High quality: Made of high-quality aluminum alloy, 100% brand-new and high-quality, fine workmanship, oxidation resistance, wear resistance and longer....
  • Full personality: The appearance of the valve cover is fashionable and full of personality. It can decorate the tires of the car and improve the....
  • Easy installation: Without welding or drilling, just screw the valve cover to the valve stem along the thread for nondestructive installation..
  • Product size: The full length of pointed valve cap is 1.78 inches (45mm) and the diameter is 0.39 inches (10mm). Please note: Due to the long length....
  • After service: If you have any questions about the product, please contact us in time, and we will provide you with satisfactory solutions..
Check Stock