Best Welding Cable Bolted Connector

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

  • LED strip connector kit: the package includes 5 pieces female connector wire cables, 5 pieces LED connector cables, 10 piece fixing clips, 10 pieces screws, 10 pieces black male to male connectors, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
  • Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
  • For waterproof LED strips, please strip off the silicon on the surface around the welding area.
  • Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
  • Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
  • Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
  • Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the con....
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

iPhone Charger Cord,[MFi Certified] 6Pack Lightning Cable 6ft,Long Fast Charging 6 Feet for Apple iPhone 14/13/12/11/Pro/Max/SE/X/XS/XR/8/8Plus/iPad/iPod(Black)

  • Durable Connector: 2022 upgraded metal material and exclusive laser welding technology make the connector of our charging cable not easy to break and not easy to rust under normal use..
  • Fast Charging: Optimized cable structure、core and the multi strand premium copper core wires ensure superior data transfer with fast and stable charging.Providing the same charging speeds as stock Apple charging cables. If you need more than 20W charging power, please purchase USB-C to lightning cable.
  • No cracking,Wear-resistant:We did all the prescribed tests for these USB-A to lightning cables: Bending test, Salt Spray Test, Plug Test. Using high-quality TPE material, the connection point at both ends of the cable were reinforced.To ensure that the wire and connection points will not be cracked, and improve the wear resistance..
  • Compatibility:Compatible with iPhone 14/13/12/11Mini/Pro/Promax/iPhone XS/iPhone Max/iPhone XR/iPhone X/iPhone 8 Plus/iPhone 8/iPhone 7 Plus/iPhone 7/iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/iPad Pro/iPad Air/Air 2/iPad mini/mini 2/mini 4/iPad 4th gen/iPod Touch 5th gen/iPod.
  • What You Get :iPhone Cable 6ft 6Pack. One purchase will get more high-quality charging cables,this is a perfect substitute for the ori....
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

4 Pin RGB Male and Female Connector Wire Cable(10 Pack) with 10 x Male 4 Pin Plugs for 5050 3528 RGB LED Light Strip

  • 1.【Easy Installation】Easy to install no tool installation, no welding connection, 5050 4-pin RGB LED strip connector kit, plug and play.
  • 2.【Flexible】LED Strip Jumper Connector are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend and the other side contacts are open to stick in..
  • 3.【Use Safety】 The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan,and the conductor is made of tinned copper and PVC insulation sleeve, the insulation layer is soft and flexible..
  • 4.【Attention】When operate this connector,it need to be worked into all contacts touching at the right point and then lock them in, these connectors have little dimples to help lock in strip placement, it needed to be so exact in the placement of the strip..
  • 5.【What you get】10 pack 4 Pin RGB Male and Female Connector Wire Cable with 10 x Male 4 Pin Plugs,when you received the item with any problem,please contact with us for after-sale service..
Check Stock

Haydyson Long Lightning Cable 6FT, [MFi Certified] iPhone Charger LED Breathing Light Up Fast Charging Cord Compatible with iPhone 14 13 12 Pro Max 11 Pro XR XS Max X 8 7 6 5S iPad,Airpods

  • 【Fast charging lightning cable】With Upgraded 8-PIN lightning connector and super copper wires configuration technology, the maximum charging current comes up to 2.4A and date transmission can reach up to 480Mbps. Making sure safe and fast charging, transfer music, movies, and more between iPhone and MacBook in seconds..
  • 【6Foot Long iPhone charger】light up Apple charger cable is made of PVC material. Once plugged in the phone, you can see the LED lights is blinking slowly as Breathing when charging. The LED light will keep on after 100% charged. The led cold light source will not heat the usb cable and will not interfere with your sight. While decorating the space, you can easily find your device in the dark..
  • 【Apple MFi-Certification】iPhone charging cords built with the Apple MFi certified chip. [Made for iPhone, iPod, iPad] Connected with a lightning port, promise no warning message pops up. Enjoy safe and fast charging, date transfer and syncing..
  • 【Ultra High Quality Assurance】Light Up iPhone charger cable adopts upgraded aluminum connector and laser welding technology, making the metal part not easy to br....
Check Stock

Extra Long Micro USB cable10ft Android Charger Cable Durable Fast Phone Charger Cord Android USB Charging Cable for Samsung Galaxy S7 S6 S7 Edge S5,S2 J7 J7V J5 J3 Note 5 4,LG G4,HTC,PS4,Camera,MP3

  • 【Extra long 3M Micro USB Cable】: With this Extra Long 3m android charger cable, you can charge your devices from a long distance when you lie on....
  • 【Micro USB Wide Compatibility】:this android charger cable for smartphones, tablets and other devices with Micro USB Ports like Samsung Galaxy S7....
  • 【Fast Charging and Sync】:This samsung charger supports the speed by delivering 5V/2.4A safe charging current and 480Mbps data transfer rate....
  • 【Strong Nylon-braided Charger Cord】:With the protection of the durable nylon-braided jacket, our USB micro cables have 10000+ bend lifespan and....
  • 【3D Aluminum Alloy Connector】:With improved 3D aluminum connector and exclusive laser welding technology, which ensures that the metal part of....
Check Stock

2-Pack LISEN iPhone Charger Cable 6ft, Apple MFi Certified Lightning Cable, Nylon Braided USB Fast Charging Cord Compatible with iPhone X/Xs Max/XR / 8/8 Plus / 7/7 Plus iPad, Grey

  • ...000+ times bending tests for extra protection and durability. The solid and durable two-shade braided armor nylon shield gives the cable stronger protection and flexible performance than others and no need to worry about tangling, effectively prolong the service life..
  • ✅ 6X STRONGER TERMINAL: Upgraded 3D aluminum connector and exclusive laser welding technology, which to ensure the metal part won’t break and also have a tighter connection which fits well even with a protective case on and will never loose connection. Charging and sync two-in-one with one lightning iPhone charger cable, multiple shields promise more stable charging current and no signal interference with data transmission..
  • ✅ 2.4A FAST CHARGING & SYNC SPEED: Built with Apple original chip, this iPhone charger cable lightning cable supports fast charging (up to 2.4A current) while preventing overheating and overcharging, ensure that you and your devices are safe. Original 8 Pin connector with a lightning end, you can enjoy lightning-fast data transfer, syncing..
  • ✅ APPLE MFI CERTIFIED: Certified by Apple, built with original terminal and original chip promise no warning message pops up, ensures that your apple devices are loaded and charge safely at maximum speed..
Check Stock

T-Shirt Clothing Apparel Officially Licensed Merchandise

  • ❥【3 in 1 Charging Cables】This multi charging cable with 3 different USB ports, including Micro USB, USB-C, and iP connectors. Support to charger most of the mobile phones available on market..
  • ❥【Durability】Braided nylon multi charger cable is more flexible and durable, can bear 20000+ bending test. 3D aluminum connector and exclusive laser welding technology, which can ensure the metal part won't break, the high-quality aluminum housing makes the cable more durable and resistant to heat and corrosion..
  • ❥【Universal Compatibility】Multi USB cable works with All USB Type-C/micro USB/ Lightning devices. Compatible with Phone 12/11 Pro Max/11/Xs/Xr/X 8/8 Plus/7/7 Plus/6/6 Plus & Pod/Pad Mini, Air, Pro, Micro-USB for Samsung Galaxy S7/S6/S4 most Android phones & Wireless Accessories, Type-C Compatible with Samsung Galaxy S10+/S10S9/S9+/S8/S7, Huawei, HTC, SONY, OnePlus, Moto..
  • ❥【Fast Charging】High-quality Copper Wire reduced charging cable resistance enables Power Line to provide the fastest possible charge via any USB charger. The maximum total output current of type c port can be up to 3A, charge faster than most 3-in-1 cables and work better for tablets and quick charge devices..
  • ❥【What You Get】2Pack 4ft multiple phone charging ....
Check Stock