9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts
The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
You can see the gas hose, trigger connector, and the welding current cable in the second picture..
This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools
【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
Move the torch tip slowly along the line of your cut until the metal has fully parted.
【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip....
MOTOCOCHE 110V Car Body Dent Repair Kit Stud Welder, 3KW 3500A Spot Welding Machine, 7 Modes Multi-spot Bonnet Door Repair Tool with Spot Dent Puller & Welding Guns
Ideal Tool -- Car body dent repair kit is a professional tool for repairing body dents/spots. Compared with traditional machines, our machine has smaller welding joints, which can effectively prevent damaging the anti-corrosion paint on the other side of the panel. Welding thickness: 0.6-1.2mm/0.024-0.047inch..
Multiple Power Levels -- Auto stud welder dent repair kit equipped with welding guns and pull gun, you can quickly switch between different welding functions. 7 welding modes/Tools, 10 power levels for your choice, you can use the right welding mode and power according to the car body condition..
High Quality -- Spot welding machine built-in powerful cooling system to ensure welding efficiency while ensuring fast heat dissipation. Complete accessories to meet your needs for repairing various dents/spots, no need to purchase extra, high quality support for long term use, saving time and money..
Applications -- Vehicle panel spot puller dent spotter is suitable for sheet metal fireproofing, spot welding, flattening, meshes, straight pull, studs, flash welding, carbon rod heating, etc. The concave surface can be repaired quickly without disassembling the vehicle, it is an essential tool for auto repair shops and auto beauty shops..
RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools Black
【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
Move the torch tip slowly along the line of your cut until the metal has fully parted.
Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display
USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine..
SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs..
PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozz....
9TRADING Welding Cabinet Cart for MIG TIG ARC Plasma Cutter Tank Storage Heavy Duty
Keep all of your welding supplies and tools organized in one place with this heavy duty welding cabinet. Smooth-rolling cart plus organized drawers....
Virego Handheld Welding Machine Gun | Handheld Welder Gun Portable ARC Welder Machine | 110V Voltage IGBT Digital MMA Welding Machine | Easy to Operate | with Folding Welding Helmet, Welding Gloves
WORRY-FREE AFTER-SALES: 100% Money Back Guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund, you can contact us on the Amazon order page. Customer satisfaction is our tireless pursuit, we will show you the most sincere attitude and satisfactory solutions..
HANDHELD WELDER GUN: New design portable Arc Welder, handheld ARC welder is compact and portable, easy to carry, replace the traditional welder, say goodbye to the bulky luggage. Intelligent chip automatically identifies matching electrodes, easy to operate and use..
HANDHELD ARC WELDING MACHINE KIT: The kit includes 1 ARC welder, 1 welding ground wire, 1 folding welding helmet, 1 pair of welding gloves, 1 welding brush, 5 welding rod, 1 user manual and 1 storage bag. It can help you to complete various DIY projects easily..
BEST CHOICE: Handheld ARC Welder with powerful air intake and cooling, with efficient heat dissipation system to ensure long working hours. Great for hobbyists and novices..
WIDE RANGE OF APPLICATIONS: 110V voltage MMA welding is suitable for welding iron, stainless steel, aluminum, low carbon steel and other metal materials. The machine is small and portable, and it is more free to work at heights..
ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V
...ting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the works....
