4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut
Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
Dimension: Standard 2.5″ x 4″ x 12″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
Dimension: Standard 2.5" x 3" x 12" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015
【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On
EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
AUTOSAVER88 Universal Black Exhaust Tip, 1.5'-2.5' Inlet 4' Outlet 9' Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe, Fit Pipes Diameter 1.5 - 2.5 Inch
Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
Dimension: Standard 1.5"-2.5" x 4" x 9" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
Stylish Look: Stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long
...RABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Exhaust Pipe Cutter Tool and Exhaust Hanger Removal Pliers for Cutting and Disassembly of Exhaust Piping Systems
Exhaust pipe cutter tool features pipe cutter chain w/ cutting wheels, exhaust pipe cutter w/ cushion grips, can be used as PVC cutter or copper pipe cutter. Replacement for exhaust pipe cutter chain, tailpipe cutter, tail pipe cutter, chain tail pipe cutter..
The exhaust pipe cutter can cut the exhaust pipe cleanly, reducing burr or burr.
Cut off the exhaust pipe on or off the car to facilitate repair or installation of a catalytic converter. Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
Exhaust hanger removal plier separates the rubber supports from exhaust hanger brackets, works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
Exhaust hanger removal plier has anti skid handle for easier use. You only need to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
Exhaust pipe cutter tool and exhaust hanger removal plier are the best combination and can easily he....
