Best Well Drilling

DEKO 8V Cordless Drill, Drill Set with 3/8"Keyless Chuck, Built-in LED, Type-C Charge Cable, 42pcs Acessories, Power Drill for Drilling and Tightening/Loosening Screws

  • 【Efficient Drilling&Screwing】This electric drill may be used for drilling in wood and plastic(Not suitable for hard objects such as masonry and concrete), and also for tightening/loosening screws. Equiped with built-in LED light, suitable for DIY and home maintenance..
  • 【Variable Speed Control Trigger】Press the switch to adjust the speed of the electric drill, and the maximum no-load speed of the mini drill is 800r/min. The harder you press, the faster the rotation speed. The chuck will stop as soon as the trigger is fully released..
  • 【Forward/Reverse Switch】A forward/reverse switch determines the direction of the power drill and also serves as a lock-off button. Maintenance and Cleaning Before any work on the machine as well as during storage, set the rotational direction switch to the center position..
  • 【Lightweight But Powerful】The net weight of the hand drill is only 1.65 pounds, and it is easy to operate with one hand. The motor is powerful and runs smoothly, providing continuous power for the electric drill..
  • 【42Pcs Premium Accessories】Our drill kit inclu....
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...tening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside o....
Check Stock

amoolo Cobalt Drill Bit Set 1/16 -1/4 ,13 Pcs M35 HSS Metal Drill Bits for Steel Stainless Steel Hard Metal Cast Iron Plastic and Wood

  • 【Premium Quality】Made of industry grade 6542 high speed steel, Cobalt twist drill bits are harder than 4241/4341 HSS used in other similar bits,....
  • 【Most Commonly-Used 13 Sizes】A complete combo set of 13 jobber length industrial drill bits for metal drilling....
  • 【Precise & Efficient Drilling Performance】✔ Fully Ground spiral groove design clears particles quickly, decreases friction and heat for a faster....
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as....
  • 【90 Days Warranty】At Amoolo, we center on customer satisfaction. Get your drill bits today along with our 90-day Hassle-Free Warranty Policy,....
Check Stock

DEWINNER Rotary Hammer Drill,1-1/4 Inch with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

  • ...OMIC DESIGN】 DEWINNER rotary hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【DRILLING CAPACITY】DEWINNER rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/2 inch drilling diameter. The best drilling diameter 16/25-22/25 inch.DEWINNER rotary hammer drill can reach 850 r/min no-load speed and 4400bpm max impact frequency..
  • 【WHAT YOU WILL GET】DEWINNER rotary hammer*1,Depth stop*1,Key-type drill chuck with SDS shank*1,Drill chuck key*1,SDS drill bits (8/10/12 X 250 mm)*3,SDS flat chisel (14 X 250 mm)*1,SDS pointed chisel (14 x 250 mm)*1, Additional handle*1,Transport case*1,Manual*1.
Check Stock

5mm Cobalt Drill Bit Set, M35 Twist HSS Drill Bits Straight Shank, 5mm High Speed Steel Drill Bits for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • ...peed steel. HSS bit set, harder than the 4241 HSS used in other similar bit sets. These bits also contain 5% cobalt for improved wear resistance and durability..
  • 【Full Grinding Process and 135° Split Point】Fully ground helical flute design removes particles quickly, reducing friction and heat for faster, cooler drilling performance. The 135° straight shank split point prevents walking, making drilling more precise and faster..
  • 【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
  • 【Quality Service】If you have any questions about our diamond bit set or are not satisfied with the product, please feel free to contact us..
Check Stock

Preamer 6-60mm HSS 4241 Large Spiral Groove Metric Step Drill Set Cone Drill Bit Woodworking Metal Hole Cutter Tool Drilling Bit

  • The drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness. Our drill bit is bigger in size so it can drill holes with larger dimensions.ture.
  • cutting blade design makes for cutting faster,automatic deburring from hole when drilling..
  • Ideal For DIY, Home and General Building/Engineering Using..
  • The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • 6-60mm(12 steps:6,10,15,20,25,30,35,40,45,50,55,60mm)Shank Diameter: 13mm.Material: HSS 4241.
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...tening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside o....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...tening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside o....
Check Stock

The Book of Five Rings

  • 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check Stock

VEVOR Hammer Drill, 13A Rotary Hammer, 1.26' SDS Rotary Hammer Drill, 4-Mode Combination Rotary Hammer, 1500W SDS Plus Hammer Drill, 850RPM Cordless Rotary Hammer w/Case, 110V Rotary Hammer Drill Kit

  • Powerful Motor: 13 amp industrial motor with 5.5 feet /lbs (7.4 joules) impact energy is designed to complete heavy-duty concrete and metalworking projects. Wattage: 1500W. The drilling capacity of rotary hammer drill: 1inch/26mm for concrete, 1.6inch/40mm, 0.5inch/13mm for steel..
  • Four Functions: SDS hammer drill's four different functions: Drilling is suitable for wood, steel, etc. Chiseling is ideal for concrete or brick. In addition, hammer drilling is ideal for heavy-duty work, and chisel position adjustment adapts to various work scenarios..
  • No-load Speed: Our rotary hammer can reach 850 r/min no-load speed and 4200bpm max impact frequency. Various applications can be completed by adjusting the trigger..
  • Humanization Design: The 360° adjustable handle can be applied to different work, and the upgraded vibration control system is designed to decrease the vibration effectively. The detachable depth gauge allows you to determine precisely how deep the drill bit should be..
  • Wide Application: Reliable SDS plus hammer drill is suitable for professional or daily home users. The combination rotary hammer will make it an easy job, no matter remove tiles or demolishing brickwork. Besides, tools are well stored and sorted in a compact case..
Check Stock