Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels
Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
a 4 inch gear puller with a 5" max. reach and 4" max. spread.
a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
[APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively..
[EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case..
[DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life..
[SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8.
Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)
Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
a 4 inch gear puller with a 3" reach and 4" max. spread.
and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings
Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
FITS: This steering wheel kit is designed to fit many major makes and models.
The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
EASY TO USE: Loosen the steering wheel retaining nut.
Lubricate and thread the pressure screw into the yoke.
Position the puller and bolts, threading the bolts equally into the steering wheel.
Tighten the center bolt until the steering wheel is free.
DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
APPLICATION: This camshaft bearing installer tool & remove puller fit for Harley Milwaukee Eight Engines (M8) models. Compatible with all Harley Davidson twin cam..
FUNCTION: The bearing puller is designed to grip the needle bearings and prevent them from falling into the crankcase. The installation tools are designed to press on the outermost diameter of the bearing, eliminating damage to the bearing, cam, or housing. The pressure adapter also sets the bearing to the proper depth..
FEATURES: The inner camshaft needle bearing installer tool & remover puller with special style collet and fine thread. Easy to install, the design holes can be suitable for the engine, and the installation progress can be checked..
MATERIAL: Made of heavy-duty steel with black powder-coated finished, prevent corrosion and rust, solid and durable. The kit includes 12 pieces, including a cam bearing plate, installer tools, puller tools, and thumb screws, as the picture shows..
WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set
SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV
Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
