Specs：(shown as Third photo)Bolts pattern 5x4.5(114.3mm) | Hub bore: 66.1mm | Thickness: 25mm each side | M12x1.25 studs(SGS Test Approved) | Package: 4x premium Dynofit Spacers with 20 strong nuts(meet ISO standard).
Wheel Spacer and Adapters Function: Improved Handling | Allows for Larger Wheels or Tires | Allows for Larger Brake Calipers | Gives Vehicles a Unique Look | Easy installation,wider stance and more aggressive appearance,no wobble, better handling.
Dynofit wheel spacer advantages: hub centric anti-vibration design wheel spacers | forged 6061-T6 Aluminum Alloy | 10.9 grade bolt | forged wheel spacers fit more Aggressive driving than other casting or universal billet.
EZISOE 6x5.5 Wheel Spacers 4Runner Tacoma 6Lug, 2 in 6x139.7mm Forged Wheel Spacers 108mm Hub Bore with 12x1.5 ET Lug Nuts
6×5.5 Wheel Spacrs Spec: 4 PCS 2 inch Thickness per spacer, 6×5.5 Bolt Pattern, Hub Bore: 108 mm, 12×1.5 Extended(ET) Shank Lug nuts. Because of the problem of Amazon unpacking, if you only receive 2pcs, please contact us and we will reissue one set for you.
Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60° conical seat plus a small 0.300″ long shank that will fit into most Toyota wheels or Aftermarket. This equates to about 6 additional full turns of thread engagement, which will usually allow for safe installation of the wheels.
Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the Aggressive Outlook.
Warranty: We provide 1 year warranty. Easy Bolt-on Installation, No specical Tool Needed.
OMT 8x6.5 Wheel Spacers, 2 Inch Wheel Adapters with Studs Compatible with 1994-2011 Dodge Ram 2500 3500 1988-1998 Ford F250 F350, 8x165.1 Wheel Spacer Kit with 130 mm Hub Bore, Set of 4
SAFE AND SECURE: This Orion Motor Tech 8x6.5 in. automotive wheel spacer kit improves the cornering, stability, handling, and control of your vehicle by adding 4 inches to its axle track.
PREMIUM MATERIAL: These wheel adapters are made from solid blocks of T6 aircraft-grade aluminum to keep them lightweight, highly durable, and strong.
the 32 zinc coated 9/16"-18 bolts are heat treated for superior strength and resistance to wear and tear.
WIDE COMPATIBILITY: Our wheel adapter set is compatible with many 1988 to 2011 Ram and Ford vehicles, including Ram 2500, Ram 3500, Ford F-250, and Ford F-350.
see below for a full list of compatible models.
EASY INSTALLATION: These spacers are precision machined with a 60 degree taper to offer exceptional safety and stability.
their intuitive design and clear instructions guide simple and quick installation so you can add style and flair to your vehicle in no time!.
1 YEAR WARRANTY: Increase your axle track, give your vehicle more traction on the road, and enjoy a slicker appearance with this sturdy wheel spacer set, your peace of mind assu....
【Quality and Safety Assurance】The KSP wheel spacers are REAL FORGED from Lightweight Anodized Black 6061-T6 Aluminum,is stronger and more durable. And they are specifically designed by in-house engineers and cnc machined to exact standards,ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these 72.56mm hubcentirc spacers mount with minimal clearance to prevent any vibration, retaining the stock driving..
【Specs】2PCS 12mm Thickness | 5X120mm Vehicle Bolt Pattern | 5X120mm Wheel bolt pattern | 72.56mm Center Bore with lip. We laser engrave the sizing and part number info for an easy identification and individuation. If you want to buy B-M-W lug bolts, you could search for the ASIN：B07RWMS7FR or B07RWW4CYR..
【Features】1.The tuner wheel spacers include pockets around the entire circumference of the spacer, allows you to pry the spacer without damaging the material；2. Reduce the weight with the bigger hole；3. The anodized surface provides additional resistance to corrosion..
【Aggressive Look】The 12mm Adapters are designed to move the wheel further out from th....
Orion Motor Tech 5x4.5 Wheel Spacers, 1 Inch Spacers with 1/2-20 Studs Compatible with Jeep Wrangler TJ YJ Grand Cherokee Ford Explorer Mustang Ranger, 82.5mm Center Bore Wheel Spacer Kit Set of 2
SAFE AND SECURE: This Orion Motor Tech 5x4.5 in. automotive wheel spacer kit improves the cornering, stability, handling, and control of your vehicle by adding 2 inches to the axle track.
PREMIUM MATERIAL: These wheel adapters are made from solid blocks of T6 aircraft-grade aluminum, keeping them lightweight, highly durable, and strong.
the 10 zinc coated 1/2"-20 bolts are heat treated for superior strength and resistance to wear and tear.
WIDE COMPATIBILITY: Our wheel adapter set is compatible with many 1982 to 2018 Jeep and Ford vehicles, including Jeep Cherokees, Jeep Wranglers, Ford Explorers, and more.
see below for a full list of compatible models.
EASY INSTALLATION: These spacers are precision machined with a 60 degree taper to offer exceptional safety and stability.
their intuitive design and clear instructions guide simple and quick installation so you can add style and flair to your vehicle in no time!.
1 YEAR WARRANTY: Increase your axle track, give your vehicle more traction on the road, and enjoy a slicker appearance with this sturdy wheel spacer set, your peace of mind assured by its strong warranty and Orion Motor Tech's usual friendly customer service.
StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs
StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12×1.25mm threads.
3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....
StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs
StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12x1.25mm threads.
3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....
