3HP 250L/min 115PSI V Type Twin Cylinder Air Compressor Pump Head Single Stage 2200W 1050rpm Universal Air Compressor Head Motor Faster Inflation&Low Noise for Factory Auto Repair Painting
...pport and correction to ensure the smooth operation of the main engine.Special valve steel is used for hair piece, which has good strength and toughness at high temperature.Faster inflation and low noise.Strong cooling blade, good cooling performance..
【Installation notes】1. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration.2.Tighten the screws (including the base and pulley screws).3.After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt..
4.The new machine must be filled with engine oil before starting, and the engine oil shall be added to the center of the red point of the oil mirror.5.The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time.6.Change the oil for the first half month, the second one and a half months, and the next two to three months..
7.Replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of poor environment, it must be replaced in one month.8.The operation of the machine will produce high temperature, be careful not to burn!【Shipment】We....
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
the two forcing screws also work with most VW vehicles’ power steering systems.
USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
QUALINSIST High Output Alternator Replacement for 2008-2012 for Honda For Accord 2010 for Honda For Accord Crosstour Alternator 11392 AND0483 VND0483 104210-5910
[Compatibility] - Perfect for 2008-2012 for Honda For Accord, 2010 for Honda For Accord Crosstour.
[Specification] - Unit Type: Alternator, Part Type: UNIT, Voltage: 12, Rotation: CW, Amperage: 130, Pulley Class: S6, Regulator: IR, Fan Type: IF, Brief: for HONDA For Accord 3.5L 2008-10, for HONDA For Accord 3.5L w/MT 2011-12, for HONDA For Accord CROSSTOUR 3.5L 2010, 6-GROOVE PULLEY 66mm OD.
[Compatible with] - Compatible with - for ARROWHEAD: AND0483. for ARROWHEAD (OEM): VND0483, for DENSO: 104210-5910. for HONDA: 31100-R70-A01, CSF91. for LESTER: 11392. for VICTORY INDUSTRIAL CORP.: VDN11300105-A.
[Why choose us] - Brand New High Quality Aftermarket Alternator. Replace the old/broken one,easy to install..
[NOTICE] - Please check part number and fitment chart carefully before place order..
A-Premium Front Driver Side Power Window Regulator w/Motor Replacement for Chevrolet Silverado Tahoe GMC Yukon XL Sierra Escalade Pickup Truck SUV 2000-2006
OE Replacement Window Regulator and Motor Assembly, Easy Fit.
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
the two forcing screws also work with most VW vehicles’ power steering systems.
USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse For power wheels regulation (60A PWM)
The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A..
Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed.
Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor..
Notice 1: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
Notice: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
