Best Wire Rope Puller

Sydien 10Pcs 304 Stainless Steel M2 Double Wire Rope Clip Cable Clamps for 1/16" Diameter Wire Cable

  • Package Content: 10Pcs M2 Wire Rope Clips..
  • Overall Size:30mm*12mm*14mm/1.18" *0.47"*0.55"(L*W*H).Thread Size:4mm*9mm/0.16"*0.35"(D*L).Fits for 1mm-1.5mm thick rope..
  • High Quality: Wire rope clips are made of stainless steel 304 for maximum rust resistance and durability..
  • Perfect Performance: This two bolt wire rope clamp provides a superior level of hold for wire ropes. This slim double design helps prevent snag..
  • Widely Use: Essential hardware item for heavy-duty rigging rope, wire and cable. Suitable for industrial uses plus aviaries,pets and marine application..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Keyboard Lube Kit 4PCS Switch Puller Lube Station Keycap Puller Remover for Mechanical Keyboard Switch Stem Holder Suit Cherry MX Gateron Kailh Switches Keyboard Cleaner Clean Kits 4 Prong Tool Puller

  • 【Rich set of mechanical keyboard switch shaft accessories】 We provide one stem holder, one switch puller, one keyboard switch lube pen and one key caps puller (only applicable to keycaps under 3U). The key cap puller can help you easily remove the key cap from the hot swap keyboard, and the switch puller can pull out the keyboard switches. The stem holder can fix the stem of the opened switch body, and the lube pen can lubricate opened switchs, which makes the lubrication easy and interesting.
  • 【Keyboard cleaning kit and customized necessary tools】 Keyboard cleaning is sometimes ignored, and a lot of dirt hidden on and under the key caps! Using the key cap remover in the kit (only for the key caps under 3U), you can easily remove your key caps. When you need to customized keyboard, the switch puller can help you easily replace switches. Give up those useless plastic switch pullers, they are very difficult to use, and will damage your key caps and switches more easily.
  • 【Tools collection for electronic enthusiasts】 For every electronic enthusiast, they are very practical tools. The stem holder in the suit is a 4 prong tool puller, which can clamp the stem and pick up any small parts. The switch extractor can be used as IC extractor or chip ext....
Check Stock

50Pcs Stainless Steel Thimble for 3/16 Steel Wire Rope Cable, M5 Rope Thimble Rigging

  • 3/16Inch THIMBLE: Package include 50Pcs M5 Wire Rope Thimble for 1/4”, 3/16” Steel Cable.
  • STAINLESS STEEL M5 THIMBLE: 3/16" thimble is made of 304 stainless steel, excellent corrosion resistance and rust resistance.
  • WIDE APPLICATIONS: Cable/Rope thimble is suitable for 1/4” and 3/16” diameter wire rope cable, widely used for lifting and connecting, wire rope fittings, marine hardware fittings and industrial rigging.
  • UNIQUE PROCESS: Polished edge and surface.
  • Stainless Steel construction can be used in indoor and outdoor applications.
  • DURABLE WIRE ROPE THIMEBLE: Every thimble is made of superior quality material with exquisite workmanship, strict craft and same Standard.
Check Stock

Mazzella Mechanical Splice Wire Rope Sling, Eye-and-Eye, 6 x 25 IWRC, 8' Length, 3/8\ Diameter, 6\ Eyes, 2800 lbs Vertical Load Capacity

  • Higher rated capacity than hand-spliced sling.
  • Rated Capacities Basket Hitch based on D/d ratio of 25. Rated Capacities based on pin diameter no larger than natural eye width or less that the nominal sling diameter.
  • Rated capacities based on design factor of 5. Sling angles less than 30 degrees shall not be used..
  • Warning: Wire rope will fail if worn, cut, overloaded, misused, damaged improperly maintained, or abused. Wire Rope failure may cause serious Death or Injury. Protect yourself and others. Always inspect wire rope for wear, damage, or abuse before each use..
Check Stock

5 Pcs 5/8 Inch Wire Rope Thimble M12 Cable Thimbles 304 Stainless Steel Thimble Rigging for 5/8 Inch Diameter Wire Rope/Cable

  • Compatibility: Cable thimble is suitable for wire rope size of 5/8"..
  • Material: 5/8" thimble is made of durable 304 stainless steel for maximum corrosion resistance and more durability..
  • Unique Design: Designed to prevent crushing or overstressing wire rope at the terminal end.
  • Provides excellent protection against surface abrasion of wire ropes..
  • Function: Enable users to create a very neat and tight loop in coated or bare wire ropes and cable..
  • Application: 5/8" thimble is ideal for marine and industrial rigging and wire rope applications, lifting, connecting and more.
Check Stock

Rope Mothers Ring 1 to 10 Simulated Birthstones - Sterling Silver - Platinum Plated - Size 8

  • Excellent Tension: Diameter: 1/8". Our wire rope has a breaking strength of 2100 lbs and a working strength of 1320 lbs. It allows for a variety of hanging, strapping and DIY activities..
  • T316 Stainless Steel: Our wire rope is made of high-strength 316 stainless steel material, enhancing the resistance to wear, rust, and other corrosion and ensures durability and longevity..
  • Reliable Construction: Constructed of 1x19 construction, 1 group of 19 strands braided together to form the cable, this steel cable has a strong enough core to ensure long service life..
  • Secure to Use: The stainless wire rope features a smooth surface, high polish, and no burr, protecting your hand, avoiding hurting and damage. It can be cut to any size according to your needs..
  • Multipurpose Wire Rope: Perfect for indoor and outdoor use. This is a multi-functional wire rope that can meet your daily needs, like garden fencing, supporting your plants, stair handrails, string lights, clothesline, etc..
Check Stock

HEVERP 24PCS 3/16 Inches M4 Stainless Steel Wire Rope Cable Clip Clamp

  • Package:24pcs 3/16 Inches M4 Stainless Steel Wire Rope Cable Clip,product size as picture 2 shown.
  • Material: Corrosion resistant stainless steel.
  • Suitable for 3/16 inches diameter wire rope or cables.
  • Made from 304 stainless steel wire rope clamps, corrosion resistance, long life span for maximum corrosion resistance and durability.
  • Perfect for rigging rope, wire and cable in unlimited applications mainly in rigging, temporary guardrail systems, securing loads, hanging banners, flags and signs and basically anything that involves cables.
Check Stock

Hit Tools 22-ICC27 1-1/16-Inch Impact Wire Rope/Cable Cutter - Sold by Ucostore Only

  • ♛ Powerful Tool ------ Excellent tool for cutting stainless steel wire rope. This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut..
  • ♛ High Quality ------ Steel Cable Cutter Cuts up to 5/32"" stainless steel cable. It features hardened steel blades, thumb catch designed for one-handed operation, and contoured cushion rubber handle non-slip grips..
  • ♛ Easy Cutting the Cable ------ This cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal. This cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
  • ♛ MULTI USAGE ------ Heavy duty steel wire rope cable cutter CUTS UP TO 5/32” stainless steel cable. This cable cutter is a perfect tool for cutting cable, wire rope, ripcords..
  • ♛ WHAT YOU GET ------ In this kit, You will get 1Pcs Excellent Cable Cutter tool for cutting stainless steel wire rope. Precise without frayi....
Check Stock

Vafon M6 Galvanized Steel 1/4\ Diameter Wire Rope Cable 6mm Thimbles Rigging 20PCS

  • Product Material: High-quality Galvanized steel Surface Treatment.
  • Overall Size: 38x23x13mm/1.5" x 0.9" x 0.5"(External).
  • Internal Size: 34 x 16mm/1.3" x 0.6"(H*Max.W).
  • Package Content: 20 x 1/4" M6 / 6mm Wire Rope Thimble.
  • Ideal for marine and industrial rigging and wire rope applications , Lifting and connecting, Wire rope fittings, Marine hardware fittings.
Check Stock