This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage.
The length of cable spanning capability of this kit is the same as other common cable railing kits；.
This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor.
The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；.
This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench.
When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful..
Material : High Quality Material - Made from 304 stainless steel wire rope clamps, corrosion resistance, long life span for maximum corrosion resistance and durability..
Size: Standard Size: M2 (1/16-inch) ·Saddle Size: 15mm x 8mm x 9mm (+/-1) / 0.6-inch x 0.3-inch x 0.35-inch(L*W*H) Thread Size: 3mm / 0.12-inch(D) Package Content: 10pcs x Wire Rope Clip Overall Length: 17mm (+/-1) / 0.67-inch.
USAGE - Wire rope clips are used to fix the loose end of the loop back to the wire rope. It is easy for you to operate, insert both ends of wire into clip saddle and tighten nuts until secure to assemble Wide Application..
The Wire Rope Clips can be used for Stage lighting safe rope,Tent rope, Clotheslines,Hanging rope, photo, picture or paint Exhibition display ,rigging, securing loads that involves cables and so on..
FSHIHINE Wire Rope Clips for 1-2 mm Diameter Wire Rope and Cable Wire Rope Lock with End Screw Stopper I Shaped Wire Rope Clamp 10 Pieces Wire Rope Grips Aluminum Crimping Loop Sleeve Replacement
【MATERIAL】The body of Duplex Wire Rope Clips Clamp is chromium-plated brass.
The end screw is nickle plated iron. Strong, durable, rust resistan..
【DIMENSIONS】These Wire Rope Clips Clamp are designed for 1 - 2 mm Diameter Wire Rope and Cable(eg. 1/25", 1/16", 2/25", 3/32", 5/64"). Wire rope clamps body length: 10mm.
【EASY TO USE & ADJUSTABLE】Compared with aluminum crimping loop sleeve, our wire rope stopper is easier to use. NO NEED Rope Crimper Tool. What you need is just a screwdriver. Quick adjust design wire rope clips, easy to install, practical, disassemble and can be reused..
【CLAMPS FUNCTION】For wire rope or cable management. Crimping clamps are a nice touch - they tidy the free ends and keep the wire rope neat and tidy..
【WIDE APPLICATION】 Wire Rope Clips Clamp is widely used in industry, construction, transportation, ship and anchor. Such as to fix clothesline in your garden, securing a shade, fencing, banner..
Swage It® S750C Primer Pocket Swager for Large and Small Primers - for The Dillon 750, XL750, XL-750
This will remove the crimp in the primer pocket that is common in military brass. This will mount to your press and if you use a case feeder you can swage over 1000 rounds / hour!.
Engineered to properly swage on the Dillon 750, XL750.
Our swager actually re-sizes the primer pocket and adds the correct fillet..
The easiest setup available to Swage on your Dillon XL50!7.
Kaka Industrial FSM-16 Metal Shrinker Stretcher, High Quality Manual Metal Forming Shrinker Stretcher With Foot Pedal, 6" Throat Depth, 16 Gauge Mild Steel Capacity
Design: Each dapping punch is etched with its no/size and fits well into the wooden base next to their correct numbers for staying organized. This flat dapping box with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves..
Features: The smooth dapping block half-sphere cavities help to form perfect dome shapes without leaving any machining mark on metal. This equipment tool set is a vibration-absorbing base that reduces vibration for improved user comfort..
Multi Tool and Sizes: One Wooden Base, One Dapping Block 5x2.5x1", One Forming Block 8x1.5x1.5", One Swage Block 2.5x2.5x2", And One Dapping Cube 2.5x2.5x2.5", 36 Dapping Punches {Dimension 1" - 36" Inches ( 3.5mm- 25mm)}..
Usage: This jewelry-making metal forming set is great for forming soft metals for coin making, ring making, metal smiths, plus goldsmith & silversmith applications and repairs..
Hilmor 1839015 Compact Swage Tool Kit - HVAC Tools and Equipment, Black
SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 1-5/8″ tubing to 5/16″ without a crack. Includes a deburring tool, designed to remove sharp edges and burrs.
SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary pistol design, combined with a weight of only 8.5 lbs, reduces user fatigue.
TO USE: Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage.
EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas.
Favordrory 5 PCS M10 Stainless Steel Thimble for 3/8 Inch Diameter Wire Rope
Compatibility: These M10 Stainless Steel Thimbles fit for 3/8" Diameter Wire Rope and Cable.
Material: Made of durable high precision 304 stainless steel material which can work fine whenever in indoors, outdoors or a high salt environment.
Unique Design: The edges of the wire rope thimbles are polished and the surface is smooth which can keep no sharp and no burrs.
Function: Prevent crushing or overstressing wire rope at the terminal end which is used to protect the eye of a wire rope or sling. Help to keep cable from flatting around the eye causing the cable to weaken.
Application: Widely used in marine and industrial rigging and wire rope applications, Lifting and connecting, Wire rope fittings, Marine hardware fittings.
These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
You will get: 5 packs of high-quality stainless steel wire rope locking devices..
Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
