Best Wire Terminal Assortment

VONVOFF 6.3mm Spade Crimp Terminal,20cm 16AWG Female Electrical Insulated Terminals,Spade Quick Connectors with Insulating Sleeve (30packs)

  • Each terminal in the electrical connectors are made of high quality tin-plated red copper, whose surfaces are plated with tin which ensures good conductivity and corrosion resistance.that resists corrosion to hold the wire tight when crimped.Your wire will never slip out of these heat shrink connectors..
  • The insulating sleeves are made of nylon, high conductivity, anti-oxidation, durable enough for your use,matching crimp terminal , protects splices from water and corrosion.Providing excellently insulates and protects electronic connections in rugged environments.
  • Female spade connectors are easy to use and inspect. It can connect product terminals of different sizes, saving time for wire bonding, and the outer insulating sleeve can be insulated,plays an effective role in insulation protection.ensures a strong wiring connection every time..
  • Package include:30pcs Spade Crimp Terminal (6.3mm female spade connectors red x 15pcs;6.3mm female spade connectors black x 15pcs).
Check Stock

4 Pieces Battery Terminal Connectors 4 Way Battery Terminal with Hex Wrench Quick Release Disconnect Car Battery Terminal Copper Car Battery Terminal Positive Negative for SAE (Gold)

  • Package content: package includes 4 pieces battery terminal connectors, namely 2 pieces positives and 2 pieces negatives, and 2 pieces hex wrenches are also included, sufficient to meet your daily requirements of usage and replacement, bringing convenience to you.
  • Quality material: the quick release disconnect car battery terminal is made of pure copper with tin-plated, sturdy and firm enough for long term usage, and it would not deform or corrupt easily.
  • It has good electrical conductivity, thus it can decrease voltage distortion and transmission loss.
  • The hex wrench is made of stainless steel, which is stable for you to use.
  • Positive and negative labels: these copper car battery terminals have labels for you to recognize which one is the positive and which one is the negative.
  • Positive has a red label, and negative has a black label, helping you connect the correct terminal for the correct polarity.
  • Detailed sizes: in these battery terminal accessories, the inner diameter of the positive battery terminal connector is 17.5-19 mm/ 0.69-0.75 inch, the inner diameter of negative battery terminal connector is 15.9-17.5 mm/ 0.63-0.69 inch, the max wire clamp is 9.5 mm/ 0.37 inch, the mini wire clamp is 6.5 mm/0.25 inch, the minimum wire size is 16 mm/ 0.63 ....
Check Stock

MILAPEAK 10pcs (5 Sets) 6 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 6 Positions Pre-Insulated Terminals Barrier Strip (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strips are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making 6 individual connections or by using the whole barrier bar or part of it up to 6 connections to a single line. Once the connections have been made....
Check Stock

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

Sound Storm Laboratories AKS8 8 Gauge Car Audio Amplifier Amp Complete Kit Wiring Installation with Install Wire Cables and RCA Interconnect

  • 17' 8-Gauge Red Power Cable, 3' 8-Gauge Black Ground Cable.
  • 16' 18-Gauge Blue Turn-on Wire, 20' Speaker Wire, Rubber Grommets x 2.
  • 16' High Performance RCA Interconnect, 6' Split Loom Tubing.
  • Competition High-Quality Fuse Holder, 5 / 16" Gold-Plated Ring Terminal.
  • 4" Wire Ties x 7, #10 Gold-Plated Ring Terminal, 1 / 4" Gold-Plated Ring Terminal.
Check Stock

TICONN 250Pcs Heat Shrink Wire Connectors, Waterproof Automotive Marine Electrical Terminals Kit, Crimp Connector Assortment, Ring Fork Spade Butt Splices

  • ...ICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly.
  • 【TYPE and SIZE】: The connector assortment includes red, blue and yellow connectors that can be used on wire AWG from 22 to 10. Five connector types: butt connector, ring connector (stud size: #10, ¼’’, 5/16’’, 3/8’’), female quick disconnect connector, male quick disconnect connector and fork connector (stud size: #10) are packaged in each connector kit..
Check Stock

TICONN 500Pcs Heat Shrink Wire Connectors, Waterproof Automotive Marine Electrical Terminals Kit, Crimp Connector Assortment, Ring Fork Spade Butt Splices

  • ...ICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly.
  • 【TYPE and SIZE】: The connector assortment includes red, blue and yellow connectors that can be used on wire AWG from 22 to 10. Five connector types: butt connector, ring connector (stud size: #10, ¼’’, 5/16’’, 3/8’’), female quick disconnect connector, male quick disconnect connector and fork connector (stud size: #10) are packaged in each connector kit..
Check Stock

Recoil True 8 Gauge Complete CCA Amplifier Wiring Kits with OFC RCA Cable

  • Complete 8 Gauge 2-Channel Amplifier Installation Kits.17ft (5.5 meters) Oxygen Free Copper 2-Channel Helical twisted construction RCA interconnect cable.
  • Copper clad aluminium power wire and speaker wire. Oxygen free copper RCA cable.
  • 17ft (5.5 meters) Premium Frosted Blue 8 Gauge power wire with ring terminal provides optimal power transfer.3ft (.95 meters) Premium Frosted Black 8 Gauge ground wire with ring terminal.
  • 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
  • 25ft (8.0 meters) Premium Frosted Blue/Black 16 Gauge speaker wire.
Check Stock

Twidec/Wire Crimping Pliers 2.8/4.8/6.3 mm Spade 26-16AMG Crimping Tools Manual Crimp Fold Tool for Open Barrel Terminals SN-48B

  • This hand crimper has efficient ratcheting mechanism. Crimping is accurate and never damage the terminal,crimping is in one step..
  • Wire Crimper Design: Made of high-carbon steel which is treated with black oxidation,rust and corrosion resistance and insulated rubber, and ratcheting mechanism design help you take less strength to make a good crimp. Crimping range is AWG26-16, 0.5-1.5mm², suitable for 2.8mm, 4.8mm, 6.3mm spade connectors.
  • This terminal crimper has a star wheel that you can adjust the handle crimp strength by adjusting the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
  • Emergency release device:Make sure that the terminal is crimped into place so that the crimped terminal and wire are securely and securely combined. The crimping operation can be terminated and the terminal can be exited in the event of a misoperation.Pressure adjustment knob:When crimping terminals of different sizes, if the wires cannot be pressed, loosen the screws, adjust the knob, + to increase the pressure, - to reduce the pressure..
Check Stock