WINDANDSKY Cutting Board for Kitchen,Stainless Steel Cutting Board and Plastic Cutting Board,Double Sided Juice Grooves Design Chopping Board, Easy to Clean,Wine Red Edge…
[DOUBLE-SIDED USE] The cutting board has a double-sided design and can be used by classification to match different vegetable cutting needs. One board is dual-purpose, suitable for home kitchen use..
【STAINLESS STEEL CUTTING BOARD】The surface of the stainless steel plate is suitable for cutting most of the food, whether it is the cutting of meat or vegetables and fruits, the cutting board is convenient and quick to use..
【JUICE GROOVE DESIGN】The built-in juice groove can retain the juice of meat, fruit, or vegetables to keep countertop clean, which greatly saves the trouble of cleaning the kitchen..
【CONVENIENT DESIGN】The cutting board has a grinding area for easy handling of garlic and ginger.
it also has a handle for easy access and hanging..
【SCRUB TEXTURE】The chopping board has a matte design and feels comfortable. You don't have to worry about the ingredients running off the table when chopping vegetables, and the cooking experience is easy and comfortable..
SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM
...he double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In addition, applicable for cutting wire mesh, plastic, leather, carpet, pvc pipe, cardboard and so on. ....
Weaver Curved Saw Scabbard 27 With Snap Hook, Black
JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Heavy Duty Paper Cutter,17 inch Guillotine Paper Cutter,500 Sheets A3 A4 B4 B5 A5 B6 B7 Papers,Guillotine Paper Scrap Slicer Trimmer for Cardstock Cards Leather with Metal Base for Office Home School
✂️【17 inch Sharp Blade】The 17″ cutting blade is made of high speed steel(HSS), quite sharp. It is wear-resistant. Guillotine paper cutter ideal for use to cut paper business cards books and leather, but also cut bubble film fabric film pearl cotton, etc..
✂️【500 Sheet Capacity】Cutting thickness is up to 4cm.The paper guillotine can cut 500 pieces of paper at most one time..
✂️【Precise Cutting】Designed for precision, with an alignment grid to achieve precision. Double scale with inch and centimeter markings, no matter which system you prefer, you can help with measurement..
✂️【Double Safety Protection】Safety lock and protective cover give you double safety protection. Press the safety lock, the paper cutter can be used.
the blue protective cover can not only prevent foreign objects from entering, but also prevent fingers from entering the blade..
✂️【Simple Operation】It is very convenient to use the guillotine paper trimmer. Rotate the pressing handle,tightly pressed paper, better assist cutting,unlock safety lock,and then press the cutter handle..
Range of processing:Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency:Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting:The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Fiskars 394631-1001 Chain Drive Extendable Tree Pruner and Pole Saw, Gardening Tools, Loppers, 716 Foot, Orange
Easily cut high branches with a sturdy tree trimming system that extends up to 16 feet and features a chain-drive design for up to 3X more power.
Includes a precision-ground steel pruner for cutting branches up to 1 1/4 inch thick and a 15 inch hooked WoodZig saw for removing larger branches.
Oval-shaped fiberglass and aluminum poles greatly reduce flex, allow you to control the cut direction and fit the natural shape of your hand.
Secure double locking systems ensure the extended pole stays put.
Full lifetime warrantyDescriptionHigh branches are within reach with the Chain Drive Extendable Pole Saw & Pruner, which includes two different cutting options and extends up to 16 feet. Chain-drive gearing gives you up to 3X more cutting power than traditional designs. Plus, oval-shaped, lightweight yet strong poles reduces flex, allow you to control the direction of the cut and fit the natural shape of your hand. A unique double locking system ensures the pole stays extended for superior control. Trim branches up to 1-1/4" thick with the sharp, durable steel pruner boasting a special low-friction coating for smooth cutting, reduced gumming and enhanced rust resistance. A compact design helps prevent snagging when reaching into tight spaces.For thicker branches....