BOMEI PACK Fiber Reinforced Packing Tape, Clear Bi Directional Filament Strapping Tape 3Inch x 55yds 6.7Mil, Total 110yds
✔5.3 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
✔Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
✔Filament reinforced packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Purple - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
6 Colors PLA 3D Printer Filament Bundle 1.75mm PLA Printing Material Each Roll 200g Vacuum Packaging Printing Filament Dryer Black Red Blue White Rainbow Fluorescent Green Filament Supplies
Quality filament bundle do you think the colors of ordinary 3D materials are too monotonous? Do you want to have more lamp colors? Don't worry, we provide you with 6 colors of printing materials, especially the rainbow color is added, which will definitely make your products more sophisticated.
6 Color combinations: you can get 6 trays of 3D printing filament consumables in different colors: black, red, blue, white, rainbow, and fluorescent green, 200g vacuum packaging per tray, suitable for various occasions and meet various needs.
Smooth printing: filament has hard material, high smoothness, and good performance.
Neatly arranged lines, no tangled lines in printing.
No peculiar smell, good forming, no blistering, no paper jams, no warpage.
High performance: our 3D printer filament dryers are made of high-purity PLA materials, with a bright surface, high strength and rigidity.
High water solubility, does not affect the surface of the printed matter.
Vacuum sealed packaging: 6 trays of 3D printing materials are carefully vacuum packed to maintain the performance of filaments.
Prevent dust and foreign matter from entering, prevent nozzle clogging, and make your printing effect more colorful.
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Flashforge 3D Printer Adventurer 3 Pro with 2 Removable Nozzle, Glass Bed and Leveling-Free, Fully Assembled, High Precision Printing with PLA/ABS/PETG/PLA-CF/PETG-CF
【245℃ & 265℃ Nozzle Bundle】printer equipped with a 0.4mm 240℃ nozzle and a 0.4mm 265℃ nozzle. Heat to 200°C (392°F) within 60 seconds. Detachable design allows you to remove the nozzle from the extruder in one push..
【Leveling Free & Glass Bed】Out of the box, Build plate is well leveled in the factory. Better flatness than flexible build plate, greatly minimal warping issues.Compatible with pre-released PEI platform assembly..
【HD Camera & Support Various Filament】Built-in HD Camera allows you to remotely view the printing process online. Adventurer 3 Pro shows great performance on 3d printing ABS, PLA, PC, PETG, PLA-CF, PETG-CF, and other filaments..
【Filament Auto-Loading & Mute Printing】Enclosed spool holder, put filament end in, then trigger filament loading via the touchscreen for auto & smooth feeding. .
【Efficient After-sales Support】All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At Flashforge, zero risk purchase is for every customer’s smiles..
