Best Wood Filament For Desktop 3d Printers

Msunlord TPE 3D Printer Filament, 95A TPE 2.85mm (Accuracy +/- 0.05mm) Flexible 3D Printing Filament, 0.95Kg Spool, Blue for 3D Printers or 3D Pens

  • 0.95Kg 2.85mm TPE(Thermoplastic polyurethanes)3D printer filament.
  • Recommended Extrusion/Nozzle Temp: 200°C - 220°C (392℉~ 428℉),Heated Bed Temp: 60°C - 80°C (140℉~ 176℉).
  • Design and manufactured in compliance with the requirements of EU REACH, RoHS. Eco-friendly, non-toxic, harmless..
  • HIGH PERFORMANCE: Low-Odor, Low-Warp, good tensile strength and ductility. Much more strong than PLA, ABS printer filament in toughness..
  • WIDELY COMPATIBLE: Compatible with 3D printers and 3D pens that use 2.85mm filament, fit for almost all popular brand 3D printers on market..
Check Stock

Creality PETG Filament 1.75 mm - White | 3D Printer Filament | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance +/- 0.2 mm | Fit Most FDM Printers

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – White | Dimensional Tolerance +/- 0.2 mm | High Precision | No Bubbles | Eco-Friendly | Stronger Toughness | Fit with Most FDM Printers.
  • MATERIAL - Creality PETG Filament offers excellent clarity, light transmission (in the translucent colors), and high gloss. PETG is also a food contact approved material, is BPA free and prints without any odor or smell! Once you've mastered the basics for printing with PETG, you will find it to be easy to print with and comes out great in a wide temperature range. PETG material, environmental protection, high gloss, printing is not easy to crack and will not emit odor..
  • QUALITY – Creality PETG filament is great even for large flat prints due to its very low shrinkage. A combination of strength, low shrinkage, smoother finish, and higher heat resistance make PETG an ideal everyday alternative to PLA and ABS. Other features include great layer adhesion, chemical resistance including acids and water. PETG is also less prone to moisture-related issues..
  • FIT MOST FDM PRINTERS - Creality PETG filament is characterized by consistent quality, high dimensional accuracy, and has been extensively tested on a variety of printers.
Check Stock

3D Printing Pen PCL Filament Refills 1.75mm Pack of 20 Colors Low Melting Temp of 70℃ High-Precision Diameter Non-Toxic Non-Clogging Gifts for Kids 200 FT

  • 【SAFER & HEALTHIER MATERIAL】Compared to 3D pen filament refills ABS/PLA 1.75mm, PCL filament with a lower melting temperature of 70℃ which....
  • 【20 COLORS 200 FEET TOTAL】3D pen filament refill pack of 20 various colors scribble your 3D artistic masterpiece idea and make your masterpiece....
  • 【ULTRA-SMOOTH】PCL filament for 3d pen with Low temp releasing technology and high-precision PCL filament 1.75mm diameter ensure your 3D drawing....
  • 【UNIVERSAL COMPATIBILITY】Compatible with most 3D Pens/3D Printers on market, Not suitable for 3Doodler pen.
  • 【ENJOY THE FUN of CREATION】This 3D printing pen filament refills are excellent gifts for kids to improve their spatial thinking, cultivate....
Check Stock

SUNLU S9 Plus Large 3D Printer, FDM 3D Printers with Filament Dryer Integration, Clog Detection, Auto Leveling, Silent Motherboard, Open Source, Touch Screen, Big Printing Size 310x310x400mm

  • 【8 Rolls of 0.25kg 1.75mm PETG Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PETG filament.Color:Black+White+Grey+Transparent+Blue+Green+Red+Orange.The design of 250g PETG filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PETG Filament】SUNLU 3d filament PETG 1.75mm is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It’s about as stiff as PLA. PETG 3d filament suggest printing temperature is 220-250°C – Base Plate Temperature: 70-80°C if no glue applied..
  • 【High Precision +/- 0.02mm Tolerance PETG filament】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free..
  • 【High Compatiblity & Vacuum Pack PETG Filament】Compatible with ....
Check Stock

Creality Ender PLA 3D Printer Filament, 1.75mm 2.2lbs(1KG) Spool for FDM 3D Printing, Biodegradable Materials Clog-Free Smoothly Feeding Tidy Winding Tangle-Free Dimensional Accuracy (White)

  • 【Crealty Ender PLA】As the brand manufacturer of Crealty 3D printers, Ender brings more professional 1.75mm PLA 3D printer filament. The Imported raw material upgrades with stronger toughness. It is not easy to break, offering clog-free, bubble-free, and tangle-free printing..
  • 【High Consistency and Smooth Output】The Ender PLA printer filament is controlled 1.75mm within ±0.03mm. So that the feeding is smoother and the material is not easily broken to ensure continuous printing. Recommended Extrusion/Nozzle Temperature 195°C - 220°C, Bed 55°C - 60°C for better printing results..
  • 【Made of Corn Starch Materials】Non-toxic, No irritating smell and can be naturally degraded safer for children or students operating. Suitable for use in schools, homes, and offices.Whether for entertainment or work, Ender PLA 3D printing filament can give you a better experience..
  • 【Wide compatibility】Due to the high-quality manufacturing accuracy standards and the small diameter tolerance of +/- 0.03mm, it can be perfectly compatible with all common 1.75mm 3D printers. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping..
Check Stock

HATCHBOX 1.75mm White PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy +/- 0.03 mm, 3D Printing Filament

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • EASY TO USE PLA FILAMENT: Unlock your creativity with our hassle-free PLA Filament! Designed to give you the best 3D printing experience, Hatchbox PLA can conveniently be used on various mainstream printers. With improved toughness and fluidity, our PLA offers wide temperature and speed ranges to suit all of your innovative needs..
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Prtiner Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING FILAMENTS: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and....
Check Stock

HATCHBOX 1.75mm Black PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy +/- 0.03 mm, 3D Printing Filament

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • EASY TO USE PLA FILAMENT: Unlock your creativity with our hassle-free PLA Filament! Designed to give you the best 3D printing experience, Hatchbox PLA can conveniently be used on various mainstream printers. With improved toughness and fluidity, our PLA offers wide temperature and speed ranges to suit all of your innovative needs..
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Prtiner Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING FILAMENTS: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and....
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

JAYO TPU 3D Printer Filament, 1.75mm Flexible TPU 3D Printing Filament Material fit for FDM 3D Printers, Dimensional Accuracy +/- 0.02mm Soft Consumables, TPU Black

  • 【Soft Filament】JAYO TPU FDM 3D Filament has a shore hardness of 95A, higher softness and tension. It is suitable for printing children's toys, shoes, medical supplies and other product models with good stretchability. JAYO filaments have a wide range of uses and gives you more printing choices..
  • 【 Flexible Filament】 TPU Flexible filament is able to withstand much higher compressive. With 600% Fracture Growth Rate, it can be used to print some strong and stable projects. No worry about fracture.
  • 【Dimensional Accuracy & Less-Tangle】JAYO 1.75mm TPU filament is advanced precisely diameter measuring in the manufacturing process. The dimensional accuracy is +/- 0.03mm. Fully automatic machine filament collection to avoid tangle or knot caused by manual winding operation. And you will get a pleasure printing experience and enjoy yourself totally.
  • 【Clog-Free & Bubble-Free】TPU Printingt filament material is completely dried for 24 hours before vacuum packaging. It can effectively protect the TPU filament from moistur and guarantee clog-free and bubble-free. You won't have any trouble of bubble and clogging and just enjoy your delicate printing.
  • 【Printing Effect& Settings】TPU 3D printing material has bright color and smooth surface and with the....
Check Stock

Snapmaker Wood Filament 3D Printer Filament 1.75mm, 750g Spool (1.65 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer Wood PLA

  • Dimensional Accuracy and Consistency: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker wood filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker Wood PLA filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wood-like, Perform Better and Less Weight: Snapmaker Wood PLA Filament is PLA-based and uses a special foaming technology, which gives it a stable foam structure to mimic actual wood. It enables you to print whatever you want with wood color and texture, and outperforms traditional wood composite in terms of printing quality.
  • Wood-like density makes the filament lighter than traditional PLA filaments and fits a wide range of applications..
  • Wide Compatibility: Snapmaker Wood filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge,....
Check Stock