✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Ebamaz 304 Stainless Steel Thick 0.5mm Metal Business Cards Blank Tablet 86X54mm Pack of 10PCS Silver Brushed Finishing Blank
1. Blank Cards, thick & firm, thickness 0.5mm,not easy to bend. 304 stainless steel material, brushed finishing silver surface.10PCS single color per....
2. High class metal business card design, blank /round corner/edge not rough. Suitable as VIP card or gift metal card for company or organization to....
3. It is a good choice as Promotion Metal Business VIP Cards / Promotion Gift Card / Metal Plaque / Nameplate / Desk Tag / Lable tag / Name Card /....
4. Make sure your engraver is powerful enough to engrave metal, ours is fiber laser machine 15W for your reference. These metal business cards can NOT....
5. These cards mainly for engraving, please Notice: CO2 engraver CAN NOT engrave metal material, it mainly engraves wood, Acrylic, leather, plastic,....
Topretty Electric Engraving Pen Kit, Cordless Rechargeable Grinding Pen with 35 Bits,Portable Mini Engraver Tools,DIY Rotary Etching Pen for Carving Glass Metal Jewelry Wood Stone Manicure-Silver
...ving pen can be used with recharge or connected to a power source and is equipped with a Type-C charging cable for easy and fast charging. 30 minutes can charge to 80%, 1 hour to fully charge.
Long-lasting battery used continuously for 1 hour under normal conditions..
Portable & Easy to Operate: The precise grinding engraver is only 21.5 cm (8.46 inches) long and weighs only 43 g (0.09 lbs), so you can put it in any of your bags and clothing pockets. You can switch and adjust the speed with one key, there are 3 gears in total, the speed of 1-3 gears is 5000-10000-18000 Rpm/Min, you can choose according to your needs..
Unique Design, Overload Protection: This DIY electric engraving pen is equipped with a power indicator, speed indicator, and overload indicator, which can know the usage of the engraving pen in real-time, and you can adjust the working speed you want according to different usage conditions. When the resistance is too large, the overload indicator light is on, and the power supply is automatically cut off for self-protection, avoiding damage to the motor and prolonging the service life..
Complete Accessories: Our metal engraver pen kit includes 30 grinding bits, 2 drilling bits, 1 shank post, and 3 stainless steel cutting discs. Simple and ....
Upgrade Electric Engraving Pen with 35 Bits, USB Rechargeable Cordless Engraving Machine, Portable DIY Rotary Engraver for Jewelry Wood Glass Stone Carving (Grey)
...affect the family's rest. It will be great for beginners and professionals to use at anytime, anywhere to make unique creations, it will be the good gift for anyone who is interested in engraving or drilling on materials or DIYS..
Wide Applications: This electric engraver tool supports you to beautify and engrave in any material supplier, such as glass, wood, eggs, plastic, jewelry, ceramics, leather, metal and etc. You can use this tool for engraving, grinding, polishing, drilling, and cutting on metal, glass, jewelry and other materials. Endless applications included engraving tools, drilling goods, toys, telephone chargers and delicate jewelry, watches and glassware..
Easy to Use: One button to turn on or turn off the engraving pen, also this bottom work for flexibly adjust the speed according to the needs of carving. There are 3 gears with speeds for your choices and our cordless engraving pen is equipped with a built-in overload protection chip. When the load resistance is too high, it will automatically power off to protect it, and prolong the service life of the jewelry engraving machine..
...ce the cutting capacity of this machine. It can cut 0.59"/15mm pine wood and 0.31"/8mm acrylic in one pass, 25mm wood and 35mm acrylic multiple passes, and cut 0.002"/0.05mm stainless steel..
【More detailed and Multi-Color Engraving】Longer RAY5 20W laser engraver with a newly upgraded 32 bits chipsets motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieves a finer engraving result and a higher contrast effect. And an air-assisted interface is reserved, which can be easily matched with various air pumps, and more clean surfaces..
【3.5" color Touchscreen & 4 Connection Methods】The Longer RAY5 laser cutter has a built-in 3.5-inch color touchscreen with a user-friendly interface. You can directly operate the machine through the touchscreen, such as checking the engraving progress, adjusting the engraving speed, or other operations. Particularly totally User-Friendly Laser Engraver, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Wi-Fi Connection.
DAPAWIN 2 Pack Mechanical Carpenter Pencil Built-in Sharpener, 1 Engraver Pen and 12 Leads(2.8mm) Men Gifts Marking Tool for Construction/Carpenters
These woodworking tools stocking stuffers for men contain 2 construction pencils, both built-in pencil sharpeners, 1 engraver pen, 3 red lead pencil refills, 3 yellow refills, and 6 grey graphite lead. Making wood, metal, glass, and concrete is part of your daily work. Well, Highly recommended this carpenters pencil. mechanical carpenter pencil is portable, easy to use, and could work efficiently. Different colors could mark clearly and accurately on hard surfaces, paper, and some dark surfaces..
The Long nose carpenter pencil with 2.8 mm point and 1.7 inches long is perfect for marking those spots with deep templates or some tiny place. This Construction pencil would not stuck in narrow places. Fits in spots where a regular pencil won't fit for marking. Smooth writing and thick sturdy lead help you mark clearly and obviously on your project. If you need a longer pen for marking, press out and extend the lead to adjust the length. Ideal for fine work, hinges locks, etc..
With the built-in sharpener when your tip starts to dull out you just sharpen it up nice and quick. No more wasting time to keep looking for a sharper, just sharp it anytime you want. Woodworking pencils’ body is plastic for the lightweight to carry and the long nose part is met....
...on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY needs. Unleash your creativity on over one hundred materials including black metal and wood, acrylic, paper, glass, bamboo, leather PCB board, aluminum oxide, etc..
Titoe CNC Machine 40W Wood Engraving Cutting Machine 10W Output Power Portable Mini Engraver Router Kit w/Eye-Protection for DIY Marking Wood Metal Leather(Engraving Area 420x400mm)
✅【Desktop CNC Machine】Titoe 4240 CNC features a powerful 20W module which adopt the most advanced jet compression technology to reduce the beam to 0.08 x 0.08 mm.Easily cut 5mm wood or 3mm acrylic easily..
✅【40W Moddule】Equipped with a aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously. This module can work at full power for 8 hours. The service life can be up to 10,000 hours.
✅ 【Wide Application】Engraving area:420*400mm.
Widely used on different materials such as paper, bamboo, wood, leather PCB board, aluminum , metal, glass, etc..
✅ 【New Eye Protection Design】The engraver with protective cover perfectly protects your eyes when it working. filter light for 97%. You and the people around can watch engraver without wearing goggles. Double limit switches can protect the engraving machine for good and stable operation perfectly.
✅【 Wide Software Compatibility】compatible with LightBurn and Grbl, supports Win 7 / Win 8 / Win 10, and Mac system.You can directly carve by importing a picture..
xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''
...W is the machine power of the laser machine.
Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
