Best Woodcut Filament

3D Printer Filament Dryer Box, SUNLU FilaDryer S2 for 3D Printing, 360° Surround Heating, Touch Screen, Real-time Humidity Display, Dryer Box for Nylon PA ABS PLA PETG Filament 1.75/2.85/3.00mm, Black

  • 【360°Embracing Heating, Rescue Poor Printing】 As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat. The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying. Keep the 3D printer filament dry, no more brittle/string/poor adhesion,print smoothly..
  • 【Extended adjustable temperature range, Longer continuous drying time】 Compared with SUNLU dryer box S1, SUNLU FDM 3D Filament Dryer S2’s adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
  • 【One-click personalization, Remember Your Operation】 New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting. The settings before the shutdown will be remembered until you change settings again..
  • 【Real-time humidity detection, Visualization of dry conditions】 Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. The change of the LED lamp ring....
Check Stock

Inland Shiny Silk Copper 1.75mm PLA 3D Printer Filament - Dimensional Accuracy +/- 0.05 mm - 1 kg Spool (2.2 lbs), 1.75 mm – Fits Most FDM/FFF Printers – Clog Free Colorful Filaments

  • SILK PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature: 190°C - 230°C (374°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • HIGH-SHINE SILK PLA:  This glossy material has a bright, silky luster that will bring your colorful creations to life. Silk filament is perfect for your large curved surface models or practical models that you want to shine..
  • HIGH-QUALITY SILK FILAMENT: Designed with the highest quality and compatibility in mind, Inland Silk PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality shiny print..
  • EASY-TO-USE: The Inland Silk PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament is compatible with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free do no....
Check Stock

Inland Shiny Silk Orange 1.75mm PLA 3D Printer Filament - Dimensional Accuracy +/- 0.05 mm - 1 kg Spool (2.2 lbs), 1.75 mm – Fits Most FDM/FFF Printers – Clog Free Colorful Filaments

  • SILK PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature: 190°C - 230°C (374°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • HIGH-SHINE SILK PLA:  This glossy material has a bright, silky luster that will bring your colorful creations to life. Silk filament is perfect for your large curved surface models or practical models that you want to shine..
  • HIGH-QUALITY SILK FILAMENT: Designed with the highest quality and compatibility in mind, Inland Silk PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality shiny print..
  • EASY-TO-USE: The Inland Silk PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament is compatible with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free do no....
Check Stock

ZIRO Carbon Fiber PLA Filament 1.75mm,3D Printer Filament Carbon Fiber PLA 1.75mm 0.8KG Spool - Black

  • 3D Printer Filament Spool Holder Material:High Quality Aluminum alloy.
  • Surface Treatment: anodizing,long service life,fine workmanship.
  • Install:Easy and quick installation, Use 2pcs M4 screws to fix, stable and not loose.
  • Filament Holder Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3.0mm 3D printer filament.
  • Application Scope: Suit for 2020 aluminum frame type 3D printer, Ender 3 series, CR-10 series.
  • Package Content: 1 Kit 3D printer Rotate Spool filament holder with base, 2pcs M4 T Nuts, 2pcs M4x10mm screws, 2pcs M3x12mm screws, 2pcs Allen key.
  • Features:The filament disk rotates concentrically to make feeding filament more smoothly.
  • The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.
Check Stock

Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box

  • ①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament..
  • ②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily..
  • ③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box..
  • ④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm..
Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

Upgraded 3D Printer Filament Dryer, SUNLU Dry Box for Filament Storage, Keep Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Filament Holder

  • 【SUNLU Dryer and Storage Box】SUNLU dryer box is specifically made for drying 3d printer filament, intended to remove moisture from the filament. It can keep the 3d filament dry during printing and can be used as a filament storage box..
  • 【Rapid Heating and Constant Temperature】The dryer box can be quickly heated to the preset temperature, and keep working within the preset time. The built-in rotating shafts keep rotating the filament, evenly heated and remove moisture..
  • 【Large Capacity and Useful Design】Maximum capacity of the Dry box is 210*85mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament. It's designed with a transparent lid that you could check the filament without open the lid..
  • 【Simple but Effective】The dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons(set temperature, time and more). It can help to keep moisture out of the filament, get dry and stay dry..
  • 【Multiple Settings】The temperature ranges is 35-55℃, the working time range is 0-6 hours, you can set different temperatures and times for different materials of filament, get the filament dry and have better print results, very useful..
Check Stock

AMOLEN 3D Printer Filament Bundle,Wood PLA Filament 1.75mm Bundle,Wood Filament,Marble PLA,Sparkles Gold,Bronze,3D Printing Filament Bundle,225g X 4 Spools

  • ✔PLA FILAMENT BUNDLE - 225g Wood Filament,contacts 20% real Bamboo fiber,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament?.
Check Stock

Woodcut Tools Bowlsaver Complete System with Two Blades for Coring Bowl Blanks 3 to 12 on Woodturning Lathe BSVR

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
  • USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....
Check Stock

SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White

  • Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
  • Recommended Bed Temperature: 60 - 80 °C.
  • High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
  • Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
  • With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
  • This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
Check Stock