Hi-Tech Diamond 4"/5" Lapidary Trim Saw | Cutting Sawing Trimming Machine | Includes 4" AND 5" Saw Blades
【Material】The saw blades uses SK5 high carbon steel, and the saw teeth are processed by high frequency quenching machine, and the hardness can reach HRC60-63 degrees..
【High Working Efficiency】High carbon steel blade is extremely flexible to permit access to tight places, cutting on the pull-stroke to eliminate buckling..
【Clean Cut Environment】Our woodworking flush cut trim saw takes triple-edge tooth, bringing you a clean cut environment and less sawdust after using..
【Basic Information】Our woodworking flush cut trim saw overall length is 300mm/11.8in, saw blades length is approx.160mm / 6.3in, thickness is approx.0.6mm / 0.02in..
【Straight Shank Petty Saw】Our woodworking flush cut trim saw is petty, lightweight, suitable for fine cutting..
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
...e items are the perfect compliment to each other for your table saw cutting needs..
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through..
Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set....
Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless Circular Saw Blade for General Purpose
USE WITH: Optimized for any 12" miter saw or slide miter saw.
VERSATILITY: Best for fast cross cutting, cutoff and trim of wood and plywood.
PRECISION: SpeedCoat antifriction finish for faster and effortless cutting.
DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance.
LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life.
NEIKO 10768A 12-Inch Carbide Saw Blade | 80 Tooth | 1-Inch Arbor | 5,000 RPM | for Use with Compound Miter Saws | Home Building, Construction, Woodworking Applications
[PRECISION]: The circular saw blades are carbide tipped to give great abrasion and heat resistance for a cleaner and smoother cut for greater efficiency and precision on your home improvement projects..
[COMPATIBILITY]: This miter saw blade has a 1-inch arbor and comes with a 20 mm arbor reducer for a tight and accurate fit..
[CUTTING EDGE]: The edges of this chop saw blade is designed to retain its sharp cutting edge and is ideal for providing a clean, precise cut on wood for home building and other projects, Do-It-Yourself (DIY) or industrial..
[RPM]: This saw blade can operate up to a maximum speed of 5000 RPM, allowing the carbide blade to execute clean cuts with ease..
[APPLICATION]: For use with a compound miter saw or chop saw, this blade can pivot left and right for angled cuts and perform beveled cuts if needed by manipulating the axes on the miter saw..
Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)
[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
[SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
[DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
[ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Calculated Industries 7434 AccuMASTER 2-in 1 Magnetic Digital Level and Angle Finder / Inclinometer / Bevel Gauge, Latest MEMs Technology, Certified IP54 Dust and Water Resistant
DUAL FUNCTIONALITY -- this tool can be used as both a bevel gauge and a digital level for carpentry. As a bevel gauge, it measures angles for woodworking. The AccuMASTER is compact, allowing it to fit into tight spots so you can get measurements you need to Perfect your project. It can also be used in welding, fabrication and even automotive tire alignment.
EXACT & EASY TO READ -- the AccuMASTER' s bright backlit StayGlow(tm) display will never leave you in the dark. The display features large numbers, making it easy to read. No more eye-balling important measurements — this handy tool gives exact numbers so you can make the most precise of cuts with confidence. It automatically shuts off after 3 minutes of inactivity, plus its improved MEMS sensor further increases battery life so it’s always ready for use, no matter how long it’s been in the tool drawer..
STRONG MAGNETIC BASE -- with its powerful magnetic base, this digital protractor can easily and firmly attach to miter saw, band saw, and table saw blades. You can also use it on fences, tables, and any other metallic surface. Thanks to its strong magnet, you no longer have to worry about holding the tool in place while taking measurements..
CERTIFIED IP54 RATING -- this woodworking tool is IP5....
Includes: (1) BS900 110 Volt 9” band saw, (1) miter gauge and (1) 1/4” x 62 inch band saw blade.
Function: an essential woodworking tool for delivering precision cuts, cutting irregular shapes Up to 3-5/8 inches deep & 9 inches wide, or ripping....
Special features: patented blade guard adjustment for quick and easy blade replacement, A blade tracking window, and a 2” dust port that keeps work....
Quick adjustments: table with rack and Pinion adjustment for easy 45 Degree angle tilt.
Power: band saw has a 2. 5 amp motor – perfect for an assortment of wood based projects.
