Geekworm DC 5V 4A Power Adapter with US Plug DC 5.5x2.5 for Raspberry Pi X820/X825/X828/X829 SATA Expansion Board/X728/ X750/X708 UPS/ X735 Power Management Board/Jetson Nano/T300/T130/T200/T208
This is DC 5V 4A Official Power adapter (PSU) for X829/X828/X825/X820 SSD/HDD expansion board, it can also be used with X750/ X708/ X728 UPS, X735....
(Note: when use this dc 5v 4a power brick for Jetson Nano board, you need the jumper to disable....
With US plug(cable lenth: 120cm/47.24inch), this adapter is an universal tool for DIY project..
Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
Compatible Work With: 11.6 inch 1920 x 1080 N116HSE-EA1 N116HSE-EJ1 N116HSE-EB1 N116HSE-EAC N116HSE-EBC 13.3 inch 1920 x 1080 N133HSE-EA1 N133HSE-EA3....
Compatible Work With: LTN156HL01 LTN156HL02-201 LTN156HL06-C01 LTN156HL07-401 LTN156HL09-401 17.3 inch 1920 x 1080 N173HCE-E31 N173HGE-E11 N173HGE-E21....
HD-MI VGA Board Work for 1920x1080 30Pin EDP Interface WLED Backlight LCD Screen (Audio Input: HDMI Audio Output: Earphone Speaker).
Recommend Power Adapter Spec. Input Power Adapter: 12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply,....
Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter
The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable
The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
This dual band wifi antenna is compliant with 802.11b/g/n/ac and wireless LANs,Bluetooth,Zigbee,Xbee and other WLAN applications.(2.4GHz 5GHz 5.8GHz)|It is ideally suited for close-in systems, typically found in apartment complex installations, neighborhood networks, industrial etc..
This high gain outdoor wifi antenna is good for Wireless HDMI Extender, Receiver Transmitter, Networks Indoor/Outdoor Wi-Fi Access Point, Surveillance Monitor, Wireless Security Camera System etc.-About how to choose WIFI antenna, please read the product description..
Never worry about any security problems. We are confident in the quality of our 5.8ghz 2.4ghz antenna and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support..
Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)
...Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
【Extra Needed】Raspberry Pi Zero 2W/Zero W, TF Card, HDMI Cable, Power Adapter.
LED Desk Lamp with Clamp, LIBORA Dimmable Clip Light for Home Office, 3 Modes 10 Brightness, Long Flexible Gooseneck, Eye-Caring, Architect Table Task Lamps with USB Adapter, Black
...ers 3 color modes: warm light(2700K), warm white light(4500K), and cool light(6500K). Each lighting mode has 10 brightness dimming levels, Ideal for reading, studying, relaxing, working, thinking, relaxing, drawing, knitting, sewing, hobby, handicrafts, craftwork, study, dorm, etc..
【Memory Function & Reliable USB Adapter】: The book light has a memory function, it will be on your previous setting when turning on again to catch your lighting preference. Our clamp lamps come with a 5V/2A adapter, which is more safe and reliable than another adapter. You don’t need to purchase an additional adapter..
【High Brightness and Long Service Life】: This desk lamp with clamp is provided enough brightness, which adopts an ultra-thin light bar and light board design, to make it has better light transmittance. Compared with incandescent lamps, their energy consumption is reduced by 80%. The light board is made of high-quality aluminum, which has better heat dissipation and can extend the service life of the swing arm lamp up to 50,000 hours..
【Risk-free Purchase】: All of our products passed the stringent quality test. If your product arrived faultily or damaged, please contact our seller support. We will help you within 24 hours. We provide a 1-year w....
