Herfair IR Receiver Cable -10FT Infrared Remote Control Extender Repeater Cable with 3.5mm Jack Plug for HD DVR Cisco Explorer Verizon FiOS and Other STB Set Top Boxes - 2 Pack
★ PLUG AND PLAY–Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of the device..
★ UNIVERSAL COMPATIBILITY – Suitable for a broad range of 38-56kHzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes..
★ 10FT CABLE – 10 feet LongCable with 3.5mm plug allows you to extend the signal receiver to a suitable position..
★ CLEAN LOOK:Our IR Repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look..
★ FLEXIBLE+ RISK-FREE PURCHASE–You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!!.
IR Infrared Emitter Extender Cable Extension (10 Feet) Triple Head3 Eye 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One
Passes IR communication: Used with an IR Repeater kit to control a device.
Extend remote control ability to any room in the house.
For use with infrared extender extension system, hidden Xbox One, Audio system, AV equipment and etc.
IMPORTANT: Compatible with devices in 38khz.
Comes with adhesive backing sticks directly onto different devices.
YoLink Smart IR Remote/IR Blaster, 38KHz Frequency IR Learning Remote Controller for TVs, BluRay/DVD Player, Home Entertainment/Audio, LED Strips, Air Conditioners, Fans, YoLink Hub Required
IR Remote: Replace all your remotes with your smartphone, copy all frequency of 38k infrared remotes such as TV, Set-up Box, Air condition, DVD, audio and etc.
Note: YoLink Smart IR Remote can only work with 38k series remotes, please make sure your device is infrared type before purchasing..
Learning Remote: This is a learning remote.
you must teach the IR Remote to learn your IR remote's signals. You must have a functional IR remote if you want the IR Remote to replace it..
App Control: Control your infrared appliance remotely via YoLink App on your iOS or Android device.
Please note: YoLink Hub or SpeakerHub (sold separately) is required to use YoLink Smart IR Remote!.
Alexa Integration: Alexa can control the IR Remote! Create a Scene automation in the YoLink app, then create an Alexa routine that triggers the YoLink scene..
Doesn't Work without YoLink Hub: YoLink Hub is the only central controller for YoLink devices, and it connects YoLink devices to the internet and the cloud. Without YoLink Hub, this smart IR Remote does not work with the YoLink app and does not support 3rd-party integration with IFTTT.
YoLink Hub is not included, please search B07TQLKQLJ for the original Hub or search B09FSS95G9 for the new SpeakerHub (talking, audio hub).
Orei HDMI Extender UltraHD Over Single Cat6/Cat7 Cable 4K @ 60Hz with HDR & IR Control - Up to 165 ft EDID Management
Extends [email protected] HDR or non-HDR video signal up to 164 feet (50 meters) using our HDMI over Cat6 Ethernet cable extender kit.
HDMI 2.0, HDCP 2.2 Compliant with Maximum input/output resolution: up to [email protected] RGB/ycbcr 4: 4: 4/ ycbcr 4: 2: 2.
Local HDMI loop-out output on transmitter to connect a display near the source.
Power over Cable – only use one power adapter at the sender side to....
One-way IR control to control the source from the remote display at the receiver side and option to copy EDID signal from the transmitter's loop-out....
Includes: Sender unit, Receiver unit, Instructions manual, World-wide voltage power adapter. & IR-kit. Lifetime OREI Tech Support & 12-Month....
SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter
{IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
{HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Universal Simple Big Button Remote for Seniors Eldly, for IR Remote Control
Universal Simple Big Button Remote for Seniors Eldly, Only for IR Remote Control. Please Check Pictures to Confirm if Your Remote is IR Remote..
Only Can Learnt for Infrared (IR) remote control.
High-grade Remote Control: Stable Performance, Farther Transmitting Distance,. with the Same Function As Your Original Remote Control..
No Programming or Setting Up Required. Strongest Signal for Multi-angle Transmission, Control Distance over 12 Meters/40 Feet..
Response Time Less Than 0.2 Seconds, over 120,000 Clicks Approved Test Before the Delivery. Hassle-free Service: 365 Days Warranty. Please Don’t Hesitate to Contact Us if You Have Any Questions..
Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)
{IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
{HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
