Best Z Wave Momentary Switch

ENERWAVE ZWN-RSM2-PLUS-NEW Z-Wave Plus Dual Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black (New Version), White

  • Enerwave Z-Wave Plus Dual Relay is the most advanced and customizable module you can add to your existing appliances and lights. Module can be installed in wall boxes behind switches and outlets or in ceiling boxes behind ceiling fans or chandeliers. Hidden relay allows you to use original switches and decorative wall plates.
  • Remotely turn your appliances (lights, fans) on and off from an internet-connected smartphone, tablet, or computer. Program Z-Wave relay switch in scenes, groups, and associations. Dynamic scheduling and control from anywhere. Z-Wave hub required.
  • Z-Wave Plus, featuring 67% improvement in range, 250% more bandwidth, Over The Air (OTA) firmware updates. Backwards compatible with existing Z-Wave devices.
  • 120-277VAC, 10A maximum load per relay. Not compatible with security panels such as Honeywell Panel, NORTEK (2GIG) Security & Control Panel. ETL-listed, FCC compliant. Dimensions: length 2.03” x width 1.72” depth 0.62”.
  • Get into IoT with the best home automation device. Connect your Z-Wave hub to Alexa or Google Assistant for full voice control. Compatibility with Alexa, Google Assistant, or IFTTT is dependent on the Z-Wave hub that is installed.
Check Stock

Enbrighten, White & Light Almond, Z-Wave Plus Smart Fan Control, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, 55258

  • Switch upgrade – Easily replace any standard in-wall switch to remotely turn on or off and adjust speed levels – high, medium and low settings – of a ceiling fan..
  • Multiple fans – Wirelessly control and schedule up to two identical fans from the same in-wall device.
  • Dedicated device – The smart control is specifically designed to operate fan speeds. It cannot be used with lighting. Lights on fans with 3 wires – usually red, black & white – can be controlled using a separate Enbrighten Z-Wave smart switch or dimmer..
  • Range extender – The fan control repeats your Z-Wave signal from your hub or other Z-Wave devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • Changeable paddles – White and light almond paddles are included to match your existing switches. Additional colors of the easily changeable paddle are also available..
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do....
Check Stock

3 Way Smart Dimmer Switch Milfra Dimmable Light Switch Compatible with Alexa Google Assistant SmartThings 2.4GHz WiFi Smart Switch Neutral Wire Needed

  • ...E ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more..
  • VERSATILE DIMMING OPTIONS – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling i....
Check Stock

UltraPro Z-Wave Smart Rocker Light Dimmer with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 39351

  • FULL RANGE DIMMING – Give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%. Works ONLY with dimmable bulbs and lamps..
  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually..
  • ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera, and more..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – Replace your existing in-wall switch in as little as 15 minutes. Includes a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT included..
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

UltraPro Z-Wave Smart Toggle Light Switch with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White, 2-Pack, 54912

  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually..
  • REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera, and more..
  • ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately).Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – Replace your existing in-wall switch in as little as 15 minutes - Wall plate is NOT included. A neutral wire is required – please confirm that the wiring in your home is compatible before purchasing (older homes may not have neutral wires)..
  • COMPATIBILITY - Works with all LED, CFL, halogen, incandescent bulbs, and other devices..
Check Stock

Honeywell Z-Wave Plus On/Off Smart Light Switch, In-Wall Paddle, Interchangeable White & Almond |Built-In Repeater & Range Extender | ZWave Hub Required - SmartThings, Wink, Alexa Compatible, 39348

  • WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Schedule timed events for connected devices and customize scenes for day or night, home or away – Switch can also be operated manually.
  • REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT..
  • ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). CANNOT connect directly with ECHO PLUS or other Alexa products (Only ZigBee products can connect directly to Echo Plus)..
  • IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing switch in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices..
  • INCLUDES CHANGEABLE PADDLE COLORS – includes white and light almond paddles to match any home décor. Features a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT INCLUDED..
Check Stock

Enbrighten Z-Wave Plus Smart Light Switch 2-pack, QuickFit & SimpleWire, Commercial 120/277VAC, Works with Google Assistant, ZWave Hub & Neutral Wire Required, Toggle, 49187,White

  • ...ified gateway Supported voltage – 120/277 VAC Wireless range Up to 150 feet.
  • SPACE-SAVING HOUSING DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs Quick Fit enhancements are the ideal smart solution for older-style switch boxes multi-gang configurations or any other application with limited space.
  • EASY INSTALLATION WITH SIMPLEWIRE – Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the switch accordingly Dual ground ports which are offset to avoid switch box mounting screws support daisy-chaining in multi-switch setups.
  • LIGHT-COMMERCIAL CAPABLE – Supports 120VAC and 277VAC for universal use in a variety of systems The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications without additional equipment The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when paired with Enbrighten Z-Wave Add-on Switches Up to five add-on switches can be connected to the same light fan or appliance.
  • ADDITIONAL FEATURES – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn on or off and c....
Check Stock

NEO Z-Wave Plus Smart Mini Power Plug Z Wave Outlet with Smart Energy Monitor Home Automation, Work with Wink, SmartThings, Vera & more, Blue 2 Pack

  • ON/OFF CONTROL & ENERGY USAGE: No matter when you are in, you can easy switch all appliances with smartphone. Energy Saving with timer on/off features that can make your appliances more convenient and intelligent. Use the power measurement feature along with the option to automatically cut power to certain devices when youre not using them in order to save energy..
  • OVERLOAD REMIND SAFETY GUARD: If the load current is greater than the maximum current, the device will send a signal to the smartphone through the gateway to remind the user of the power consumption and prent the fired hazard..
  • SMART PLUG SMART LIFE: The most universal smart home devices. To connect the smart plug to Z-wave network with gateway, through the Smartphone App you can remote control your home appliances anytime, anywhere. Any detected use of energy can prompt the system to immediately send a notification to your smartphone..
  • SMART HOME FULL GUARD: Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway. Enjoy your smart home with the smart plug. Automate your home to provide you with the highest possible level of comfort and security..
  • Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.....
Check Stock