JAMMY 45 Trailer Swing Door Hinged Cam Bar Lock Hasp Latch Handle Utility Cargo
(1) 45" Trailer Door Zinc Cam Bar Lock Kit....
Includes: 45" Zinc Hinged Bar, Handle and Hasp....
Mounting Holes are Approx. 37" Inside Holes center to center and 43 1/2" Outside Holes center to center... Hinge Plates Are Approx. 36" Apart , Hinge....
Hinge Mounting Bolt Holes Are Approx. 3 1/4" Center to Center... Bolts and Fasteners are NOT INCLUDED....
Handle Is Approx. 14" Long... Handle Locking Hasp Receiver Is Approx. 5" by 2"... This Item Only Ships Within The 48 US States....
3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
2 x tie plates for 1-3/4" or 2" leaf springs.
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
[MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
[APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
[EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
[PACKAGE CONTENT] 40 x Cam fittings. 40 x Connecting rod bolts. 40 x Plastic nuts..
Buyers Products Heavy Duty USA Tiedown Anchors with Backing Plates, Surface Mount D-Ring 6,000 lb. Capacity, 2-Pack
This listing is for two (2) zinc plated steel D-rings. This is a home grown product manufactured right here in the USA. Each ring provides a strong 6,000 lb. rated break strength (straight pull) with a W.L.L. (working load limit) of 2,000 lbs. The zinc plated coating provides a weather resistant barrier..
RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
APPLICATIONS: These versatile tiedown attachments can be used on the floor of an enclosed or open trailer to secure cargo, tie down motorcycles, ATV's, lawnmowers, light automobiles, or just about anything that needs to be secured during transportation..
SPECIFICATIONS: Specifications are illustrated in the secondary image, here are the written dimensions: The 3/8 diameter ring measures 2-1/4 wide x 2-1/4 long on center. The TOP CAP is 1/8 thick. It measures 1-3/16 wide x 3-1/4 long, with 3/8 holes on 2-5/16" center. To get a comparison feel for the siz....
Buyers Products Heavy Duty USA Tiedown Anchors with Backing Plates, Surface Mount D-Ring 6,000 lb. Capacity, 1-Pack
This listing is for one (1) zinc plated steel D-rings. This is a home grown product manufactured right here in the USA. Each ring provides a strong 6,000 lb. rated break strength (straight pull) with a W.L.L. (working load limit) of 2,000 lbs. The zinc plated coating provides a weather resistant barrier..
RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
APPLICATIONS: These versatile tiedown attachments can be used on the floor of an enclosed or open trailer to secure cargo, tie down motorcycles, ATV's, lawnmowers, light automobiles, or just about anything that needs to be secured during transportation..
SPECIFICATIONS: Specifications are illustrated in the secondary image, here are the written dimensions: The 3/8 diameter ring measures 2-1/4 wide x 2-1/4 long on center. The TOP CAP is 1/8 thick. It measures 1-3/16 wide x 3-1/4 long, with 3/8 holes on 2-5/16" center. To get a comparison feel for the siz....
Buyers Products Heavy Duty USA Tiedown Anchors with Backing Plates, Surface Mount D-Ring 6,000 lb. Capacity, 4-Pack
This listing is for four (4) zinc plated steel D-rings. This is a home grown product manufactured right here in the USA. Each ring provides a strong 6,000 lb. rated break strength (straight pull) with a W.L.L. (working load limit) of 2,000 lbs. The zinc plated coating provides a weather resistant barrier..
RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
APPLICATIONS: These versatile tiedown attachments can be used on the floor of an enclosed or open trailer to secure cargo, tie down motorcycles, ATV's, lawnmowers, light automobiles, or just about anything that needs to be secured during transportation..
SPECIFICATIONS: Specifications are illustrated in the secondary image, here are the written dimensions: The 3/8 diameter ring measures 2-1/4 wide x 2-1/4 long on center. The TOP CAP is 1/8 thick. It measures 1-3/16 wide x 3-1/4 long, with 3/8 holes on 2-5/16" center. To get a comparison feel for the si....
...tailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. Our th....
1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Bed Claw Queen Bed Modification Plate, Headboard Attachment Bracket, Set of 2
Perfect for Full (Double) to Queen conversions, special projects or those odd size headboards. Modifications can be made as long as the size differential is within 4"..
Approximate Dimensions: 5" Wide x 5 1/4" Tall (Larger Side) x 3-7/8" Tall (Smaller Side).
The Bed Claw Modification Plates are packed as a pair and come with nuts and bolts for attachment, as well as instructions..
This is the original, trusted Bed Claw brand of Modification Plate, made in the United States using only high-quality steel. Product has a Ltd. Lifetime Warranty..
Zinc Plated to prevent rust and corrosion, ensuring a long life and preventing damage to your bed..
