Best boring Bar Set

EZshoot Bore Sight 9mm Red Laser Boresighter with 3 Sets of Batteries

  • 9mm Boresighter - The EZshoot 9mm laser bore sight is also tested and adjusted before leaving the factory, and the zeroing is more accurate. The good size design makes this bore sight suitable for a 9mm chamber, please confirm the chamber size before purchasing..
  • Visibility Distance - High-precision bore sight can reach a range of 15 to 100 yards in dimly lit environments. The clearly red laser allows you to quickly zero and aim, greatly reducing the waste of time..
  • Application - The 9mm laser bore sight fits the 9mm chamber, caliber specific. Class IIIA laser, less than 5mW..
  • Sturdy and Durable - Sturdy and durable brass construction, EZshoot laser bore sight 9mm can well maintain shape even at high or low temperature, which can ensure the accuracy of the bore sighter..
  • 6 Upgraded Batteries - The laser bore sight for 9mm comes with 3 set upgraded batteries (6 AG3 batteries), and each set can last an hour. Please remove the batteries after use..
Check Stock

GEARWRENCH 3/8" Drive 6 Point Standard Impact Metric Socket 9mm - 84310N

  • 9mm Boresighter - The EZshoot 9mm laser bore sight is also tested and adjusted before leaving the factory, and the zeroing is more accurate. The good size design makes this bore sight suitable for a 9mm chamber, please confirm the chamber size before purchasing..
  • Visibility Distance - High-precision bore sight can reach a range of 15 to 100 yards in dimly lit environments. The clearly red laser allows you to quickly zero and aim, greatly reducing the waste of time..
  • Application - The 9mm laser bore sight fits the 9mm chamber, caliber specific. Class IIIA laser, less than 5mW..
  • Sturdy and Durable - Sturdy and durable brass construction, EZshoot laser bore sight 9mm can well maintain shape even at high or low temperature, which can ensure the accuracy of the bore sighter..
  • 6 Upgraded Batteries - The laser bore sight for 9mm comes with 3 set upgraded batteries (6 AG3 batteries), and each set can last an hour. Please remove the batteries after use..
Check Stock

ABN Auto Wire Brush 38-Piece Set – Stainless Steel Brass Nylon with Handle Extension Bar 1/4in Hex Drill Shank

  • AUTOMOTIVE CLEANING: The ABN Auto Wire Brush 38-Piece Set – Stainless Steel, Brass, Nylon with Handle, Extension Bar, 1/4" Inch Hex Drill Shank is....
  • MULTIPLE APPLICATIONS: Eliminate rust, corrosion, and dust, unclog EGR ports, clean corroded light sockets and battery terminal clamps, remove bead....
  • EASY TO USE: Stick one of the brushes on the included handle to bore out any rust or dirt.
  • Quick-release rubber handle with ergonomic design for a....
  • EASY STORAGE: Heavy-duty 15.5” x 2.5” x 10” (39.4cm x 6.4cm x 25.4cm) plastic blow-molded carrying case for easy transportation, safe storage,....
  • CONTENTS: Package includes (36) wire brushes 8mm to 19mm – (12) brass, (12) stainless steel, (12) nylon from sizes + (1) handle + (1) extension bar....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Feyachi 223 5.56 Laser Bore Sight .223 Rem 5.56mm NATO Red Laser Boresighter for Cal 223 556 with 3 Sets of Batteries

  • [Specifications] Feyachi bore sight laser is a class IIIA laser with a power of less than 5mW and a wave length of 632-650nm of red laser..
  • [Sturdy Design] Robust and durable brass construction makes the bore sight laser built to last and easy to sit perfectly in the bore..
  • [3 Set Battery] The 223 laser bore sight comes with 3 set of batteries, total of 9 upgraded batteries with a life span of up to one hour on each set..
  • [High Accuracy] The fastest red dot laser zeroing and sighting system and save you time. Reduce wasted cartridges and shells..
  • [Application] The bore sight is built to be able to fit in .223 chamber with caliber specification..
Check Stock

Green Bore Sight 223 5.56mm Laser Boresighter with 3 Sets of Batteries

  • Green bore sight class IIIA less than 5mW and a wave length of 510-520nm of green laser..
  • Laser bore sight fits for 5.56 .223 chamber, caliber specific easy to sit perfectly in the bore..
  • The 223 green laser bore sight comes with 3 set of batteries, total of 9 upgraded batteries with each set of battery can last up to 35 minutes..
  • The fastest green dot laser zeroing and sighting system and save you time. Reduce wasted cartridges and shells..
  • Robust and durable brass construction makes the laser boresighter built to last. Clear and bright green laser, which can provide longer distance sighting than red laser bore sight..
Check Stock

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

  • Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
  • Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme fine gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

SHB12 Small Bore Boring Bar, High Speed Steel Lathe Extension Tool for CNC Turning Milling (SHB-12-03)

  • There are many optional types of SHB-12-03, SHB-12-04, SHB-12-05, HB-12-06 to meet various needs..
  • Vacuum nitriding treatment makes the surface harder and more wear-resistant. Made of high-quality high-speed steel material, with high hardness and high strength..
  • The entire working part of the small hole boring bar is precision ground and hardened, which is suitable for various CNC turning and milling machines..
  • The small hole boring bar is quenched at high temperature, which greatly improves the hardness, wear resistance, fatigue strength and toughness..
  • We strive to provide a product of the highest quality and the best customer experience, if you are not completely satisfied, do not hesitate to contact us at any time..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock