Best odroid Devboard

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

  • Expands into 4 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifii), Orange Pi, ODROID, Banana Pi.
  • Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.0, Sony Xperla NX-02D, Sony Xperla acro HDIS12S.Toshiba REGZA Phone-TO1D, and Sony S-series Tablet..
  • Draws power only from OTG port, current for USB devices is limited to host capability.
  • With USB2.0 4-Port Hub, for Mouse, Keyboard, U disk, Camera, Printer and so on. Easy plug and play installation device, no external power needed No driver needed for Android and PC with USB 2.0 port Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps.
Check Stock

RG351V Retro Portable Console Built in WiFi Games Support PSP / PS1 / N64 / NDS Emuelec Odroid Go Advance System 3.5inch IPS Screen with 640×480 Resolution Game Console

  • 【Amazing Wood Grain Design】: This new retro console arrives with a vertical look similar to the Game boy with a very careful style and with three....
  • 【Built-in Wi-Fi】: The new function built-in WiFi can support 2 game consoles, online sparring, so that you and your friends can play games....
  • 【High-Quality 4:3 IPS display】: it has a high quality screen 3.5-inch IPs with a resolution of 640 x 480 pixels. By having a vertical form the....
  • 【Free 64G Card Preinstall 10000+ Games】: The handheld game console is compatible for Odroid Go Advance System and supports more than 20 emulators,....
  • 【3900mah Large Capacity Battery】: Built-in 3900mAh large capacity lithium battery. Long standby time and long battery life. Support up to 8 hours....
Check Stock

RG351V Handheld Game Console Retro Game Console Support PSP / PS1 / N64 / NDS Opensource System RK3326 Chip 3.5 Inch IPS Screen Portable Built in WiFi Console Vertical Version Gameboy Design

  • 【Amazing Gameboy Design】: This new retro console arrives with a vertical look similar to the Game boy with a very careful style and with three....
  • 【Built-in Wi-Fi】: The new function built-in WiFi can support 2 game consoles, online sparring, so that you and your friends can play games....
  • 【High-Quality 4:3 IPS display】: it has a high quality screen 3.5-inch IPs with a resolution of 640 x 480 pixels. By having a vertical form the....
  • 【Free 64G Card Preinstall 10000+ Games】: The handheld game console is compatible for Odroid Go Advance System and supports more than 20 emulators....
  • 【3900mah Large Capacity Battery】: Built-in 3900mAh large capacity lithium battery. Long standby time and long battery life. Support up to 8 hours....
Check Stock

BrosTrend Linux WiFi Adapter for Ubuntu Mint Kali Debian Lubuntu Xubuntu Mate Zorin PureOS Raspberry Pi 2+ Windows 11 1200Mbps 5GHz/2.4GHz Long Range 2X5dBi Antennas USB3.0

  • MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 6.0, Ubuntu 22.10 ~ 16.04, Debian 11/10/9/8, Linux Mint 21~18, LMDE 5~1, Kali Linux, Pop!_OS,....
  • SUPPORTED ARCHITECTURES: x86_64/x86_32 (PCs, VirtualBox..), aarch64/armhf (Raspberry Pi 2+, Odroid...). UNSUPPORTED DISTRIBUTIONS: currently NOT....
  • FAST WI-FI SPEED: You can get 867Mbps Wi-Fi speed on 5GHz band or 300Mbps speed on 2.4GHz band, best choice for online 4K video streaming, gaming,....
  • BOOST YOUR WIRELESS RANGE: Comes with 2 Pieces of Long Range WiFi Antennas of 5dBi, this Linux Ubuntu WiFi USB Adapter Ensures Range Extended WiFi....
  • ADVANCED WPA3 SECURITY: Secure Your Devices and Network Privacy by Supporting the Latest Wireless Encryption: WPA3-SAE, WPA2/WPA/WEP, AES/PSK/TKIP,....
Check Stock

BrosTrend Linux USB WiFi Adapter 1200Mbps Supports Ubuntu Mint Kali Debian Kubuntu Mate Zorin PureOS Raspberry Pi 2+ Windows 11 USB3.0 Wireless Dual Band Wi-Fi 5GHz/867Mbps + 2.4GHz/300Mbps

  • MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 6.0, Ubuntu 22.10 ~ 16.04, Debian 11~8, Linux Mint 21~18, LMDE 5~1, Kali Linux, Pop!_OS,....
  • SUPPORTED ARCHITECTURES: x86_64/x86_32 (PCs, VirtualBox..), aarch64/armhf (Raspberry Pi 2+, Odroid...). UNSUPPORTED DISTRIBUTIONS: currently NOT....
  • FAST WI-FI SPEED: You can get 867Mbps Wi-Fi speed on 5GHz band or 300Mbps speed on 2.4GHz band, best choice for online 4K video streaming, gaming,....
  • MULTIPLE WORKING MODES: This Linux compatible usb wifi adapter supports these mode: Monitor mode, IBSS, Managed, AP, P2P-client, P2P-GO.
  • ADVANCED ENCRYPTION SECURITY: Secure Your Devices and Network Privacy by Supporting Wireless Encryption: WPA2/WPA/WEP, AES/PSK/TKIP, 802.1x.
Check Stock

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

  • ➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4..
  • ➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging ..
  • ➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged..
  • ➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage..
  • ➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm.
Check Stock

UL Listed GOOKYO 5V 4A Power Supply 5VDC 4000mA Wall Charger Multi Tip Switching Replacement AC Adapter Fit for Jetson Nano,Atomic Pi,USB Hub,3d printer,Pi 3/4 and More DC 5v Devices Power Supply Cord

  • Safety: With the UL quality certification authority, our products are in compliance with top industry standards, and include numerous safety....
  • Extensive Compatibility:This product is widely used, application products such as: Jetson Nano, Atomic Pi,Raspberry Pi, Odroid XU4, Pi 4, Pi 3, USB....
  • More selective:Product connector size:5.5mm x 2.1mm,And in order to meet your more requirements,We will gift you of 8 connectors to you, Gift....
  • Input: 100-240V ~ 50/60Hz,Wide voltage design, Almost all countries contain civil voltage range.
  • Output: 5V 4A/ 5Volt 4000MA 20W,(Work for 5V dc....
  • Warranty: Your shopping experience is important for us. If you don't want It for any reason, we will happily accept the return and refund in 30 days.....
Check Stock

TOPGREENER High Speed USB Wall Outlet, 15A Tamper-Resistant Receptacles, Compatible with iPhone, Samsung Galaxy, LG, HTC & other Smartphones, UL Listed, TU2154A-GD, Gold

  • ... One M9, Dell, Motorala, Sony, Nokia, Lenovo Yoga/ThinkPad, Acer tab and more, Smart phone four-in-one OTG data cable micro USB splitter a drag four auxiliary power supply.
  • 【Enhance Your Device】Expands into 3 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifi), Orange Pi, ODROID, Banana Pi ,Raspbian Jessie Tablet.
  • 【Compact Multifunction HUB】There are three USB ports, you can insert U disk, keyboard, mouse and other equipment (but does not support the simultaneous insertion of two U disk), and the other with a micro USB female, you can switch to the U-switch or keyboard power supply.
  • 【Achieve Your Work efficiently】OTG port provides a simple way to connect phone to a USB capable computer for data synchronization and file transfers, Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps. Please NOTE only for Micron USB connector smart phone or tablet.
  • 【NOTE】AVOID CONNECTING WITH FAST CHARGER.Make sure the output of the charger is 5V (4.7-5.3V) / 2A.The chip inside the hub will be BURNED OUT if the VOLTAGE > 5.3V.
Check Stock

Banana Pi BPI-M5 Amlogic S905X3 Single Board Computer with LPDDR4 4GB RAM and 16GB eMMC Storage for AIOT Support Android Debian Raspbian Armbian

  • [High Performance Processor] Amlogic S905X3 quad-core Cortex-A55 processor (2.0GHz).
  • 16GB eMMC onboard storage ---- MicroSD slot with support for up to 256GB expansion.
  • [4K Smart Home Audio and Video chip] Adopt quad-core 64-bit ARM-A55 architecture CPU chips, integrate G31 graphics processor, support 4K video decoding and 4K video output.
  • [SDK and Various System Operation Support] Banana Pi M5 support multiple various OS, like Android 9, and Raspbian and Linux system, as well as third party image Odroid Android image.
  • [Multifunction Interfaces] 4 x USB 3.0 ports.
  • Power Source: 5 volts at 3 amps via micro USB (TYPE C).
  • [Wifi & BT support via expansion board] BPI M5 support SDIO interface Wifi&BT, you can buy the WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooth 5.0..
  • [Wiki] https://wiki.banana-pi.org/Banana_Pi_BPI-M5.
  • If you have any after-sales problems, please contact monica @ smartfire.cn. Click "WayPonDEV" and ask a question or leave the message in our forum at "forum.youyeetoo .com/"..
Check Stock